User's Manual

Telemetry Functions at the Information Center
Telemetry Functions at the Information Center & TeleMon
9-9
Unit-
Configurable
Settings
Unit Settings provide access to clinical configuration items that affect all
patients on an Information Center. Changes in unit settings take effect upon
discharge, except for Standby duration and SpO
2
mode, which take effect
immediately.
Access to unit settings requires a password, and the displays are in English.
Telemetry specific settings are accessed through All Controls -> Unit Settings
-> Telemetry Setup. The setting for telemetry non-arrhythmia yellow alarms
is located in All Controls -> Unit Settings -> Alarms Unit Settings. For all
other information on unit settings, see IntelliVue Information Center
Instructions for Use.
SpO
2
Alarm Turn SpO
2
alarms on/off at the
Information Center.
enable (on)
disable (off)
enable
Unit Settings Change current settings back to
last saved clinical unit settings.
(none)
Patient-Configurable Settings in Telemetry Setup
Control Function Setting Choices
Factory
Default
Unit Settings - Telemetry Setup
Control Function Settings
Factory
Default
Patient Type Set patient type used for SpO
2
and NBP alarm limits.
Adult
Pediatric
Adult