User's Manual
Table Of Contents
- Introducing IntelliVue Telemetry
- Product Safety
- Transceiver Controls
- Basic Operation
- Alarms
- ECG Monitoring
- ST/AR Arrhythmia Monitoring
- SpO2 Monitoring
- Telemetry Functions at the Information Center & TeleMon
- Telemetry Functions at the Information Center
- Telemetry Controls in the Patient Window
- Locating the Transceiver (Find Device)
- Viewing Device Location in the Patient Window (optional)
- Viewing Device Location History (optional)
- Using the Device Location Client (optional)
- Patient Configurable Settings in Telemetry Setup
- Unit- Configurable Settings
- RF Auto Shutoff
- Transceiver Operation when Connected to TeleMon
- Telemetry Functions at the Information Center
- Pairing Monitoring Devices
- Maintenance, Cleaning & Troubleshooting
- Safety Standards & Specifications
- Accessories
- Sales and Support Offices
Non-networked Devices
Pairing Monitoring Devices
10-19
Note—The rubber cover/strap can be easily removed, e.g. for cleaning purposes,
by dipping that end of the adapter in isopropyl alcohol and pushing up from the
base of the cover. Do not pull on the strap.
Step Action
1 Remove the protective cover from the transceiver’s monitor/service
port.
2 Position the rubber cover over the top of the SRRA. Attach the
connected strap around the transceiver above the Leadset Insertion
Guide.
3 Insert the SRRA connector in the monitor/service port.