User's Manual
Table Of Contents
- Introducing IntelliVue Telemetry
- Product Safety
- Transceiver Controls
- Basic Operation
- Alarms
- ECG Monitoring
- ST/AR Arrhythmia Monitoring
- SpO2 Monitoring
- Telemetry Functions at the Information Center & TeleMon
- Telemetry Functions at the Information Center
- Telemetry Controls in the Patient Window
- Locating the Transceiver (Find Device)
- Viewing Device Location in the Patient Window (optional)
- Viewing Device Location History (optional)
- Using the Device Location Client (optional)
- Patient Configurable Settings in Telemetry Setup
- Unit- Configurable Settings
- RF Auto Shutoff
- Transceiver Operation when Connected to TeleMon
- Telemetry Functions at the Information Center
- Pairing Monitoring Devices
- Maintenance, Cleaning & Troubleshooting
- Safety Standards & Specifications
- Accessories
- Sales and Support Offices
Cleaning and Sterilization
11-6 Maintenance, Cleaning & Troubleshooting
*To prevent damage, avoid the use of antibacterial soap and water and Cidex
inside the battery compartment.
Note—The cleaners listed above are also suitable for the optional Short- Range
Radio Adapter (SRRA). Remove the rubber cover/strap by dipping that end of
the adapter in isopropyl alcohol and pushing up from the base of the cover. Do
not pull on the strap.
Unsupported
Cleaners
Cidex* Gluteraldehyde (2.4%)
WipesPlus
Disinfecting
Wipes
Phenylphenol (0.28%), Benzyl-p-chlorophenol
(0.03%)
TechSpray
General Purpose
Cleaner
Isopropyl Alcohol
Cleaner Active Ingredient
Active
Ingredient
Example
Quaternary
Ammonium based
Virex Tb, SaniCloth HB, Purell Sanitizing Wipes,
Clorox Disinfecting Wipes
Phenol based
(>
1%)
3M Phenolic Disinfectant Cleaner
Ether based Kleenaseptic