User's Manual

Briefing the Patient
4-6 Basic Operation
Resuming
Monitoring
Briefing the Patient
WarningWarning
Patients should be instructed not to open the battery compartment while
the transceiver is in use.
If the Telemetry button has been configured to generate a Nurse Call, recording
at the Information Center, or both, instruct the patient to use the button when
needed.
Step Action
1 If the standby period has not expired:
•Press the Check button to re-establish contact with the
Information Center. The single beep at the transceiver verifies
that monitoring has resumed.
• If you hear a double beep, click Resume Monitoring at the
Information Center. If there’s still no association, contact the
service provider.
If the standby period has expired:
• Monitoring resumes automatically if the patient is in the
coverage area. Press the Check button to verify the
resumption of monitoring. You should hear a single beep.
If a new patient is connected:
•Press the
Check button, or select the Resume Monitoring in
the appropriate patient sector.
Important—When an EASI patient comes out of Standby, the lead
settings are reset to the default EASI leads.