User's Manual

Displaying Resp on the MX40
Monitoring Respiration Rate (Resp) 8-5
Displaying Resp on the MX40
 To display the Resp waveform and/or numeric:
1 At the IntelliVue Information Center iX, select the Measurements
button from the Main Window.
2 From the Measurements Window, select Resp.
3 Click the I/O Resp button to toggle on or off as appropriate.
4 At the MX40, select a waveform area to display the Resp waveform.
5 The Change Wave menu is displayed.
6 From the Change Wave menu, select Resp.
7 Select any measurement numeric to change to display the Resp
numeric.
8 Select Change Numeric (it may be necessary to scroll down).
Note — The Change Wave menu is also used to adjust the Resp
waveform size at the MX40 and at the IntelliVue Information Center iX.)
9 From the Change Numeric menu, select Resp.