User's Manual

Locating the MX40 (Find Device)
Monitoring with the MX40 at the Information Center 11-7
Locating the MX40 (Find Device)
The Find Device feature enables you to generate an alternating pitch
repeated tone at the MX40 to assist in locating a missing device. Find
Device requires that the MX40 has sufficient battery power and is within
the coverage area.
 To locate an MX40 (IIC):
1 From the Patient Window, select Telemetry Setup.
2 Select Find Device to generate a repeated tone at the MX40.
To silence this tone, touch the silence key on the MX40.
 To locate an MX40 (IIC iX):
1 Click the Measurements application button.
2 Select Telemetry Setup.
3 Select Find.
To silence this tone, touch the silence key on the MX40.