User's Manual

Unit Configurable Settings (IIC)
Monitoring with the MX40 at the Information Center 11-15
Unit Settings - Telemetry Setup
Control
Function
Settings
Factory
Default
RF Auto
Shutoff
Enable/disable RF
operation during an
extended situation of all
leads off for more than 10
minutes and the SpO
2
is
not being measured
continuously.
enable
disable
enable (MX40
will shut off after
10 minutes of
Leads Off
condition and
SpO
2
is not
being measured
continuously.
Reconnect the
patient cable to
resume
monitoring.)
Autopair
Enable/disable the
autopairing of the MX40
and the IntelliVue Patient
Monitor at the Information
Center.
enable
disable
enable
Enable
Cableless
Measurements
Enable/disable the use of
IntelliVue Cableless
Measurements for SpO
2
and NBP
enable
disable
disable
SRR Fast
Transition
Reduce the delay time
when fast switching
between the MX40 and
the patient monitor.
enable
disable
enable
Fixed Pacer
Amplitude
Sets the appearance of
the pacer spikes at the
Information Center to a
fixed size as they appear
in the patient window.
enable
disable
disable
Enable SpO
2
Enable/disable the SpO
2
measurement at the
Information Center.
enable
disable
enable