Manual

o 1
□
Lock turning ring
if necessary
Remove accessories Mount drip tray and
drip grid
Start programming
Cancel with ESC
Function...
search -------- '
select ----------
LANGUAGE
WATER HARDN.
Adjustment
search--------'
select +
store
Deutsdi - italiano - français - ...
Hard. 1 - Hard. 2 - Hard. 3 - Hard. 4
Supplied accessories
Key for strainer dismantling/
assembly
Measuring dipper
Technicai Data
- Type
- Nominal voltage
- Mains cable
- Nominal output
- Pump pressure
- Preparation time
- Coffee grounds ejection
- Water quantity dosage
- Capacity
- Steam volume
- Dimensions (L X W X H)
- Weight (net)
Cleaning brush
Test strip for water hardness
SUP 015 RE
see technical data
1.2 m
see technical data
Approx. 15 bar
Espresso approx. 20 s / cup, coffee approx. 30 s / cup
Automatic
Electronic, continuous
Water tank approx. 2,4 I
Bean container approx. 300 g beans
Continuously adjustable
Approx. 45 X 33 X 40 cm
Approx. 45 X 70 X 40 cm, with opened sen/ice door
Approx. 16 kg
TROUBLESHOOTING
This TSM SUCCESS MANUAL® has been created in conformity with
standards for operationai safely. Based on a risk anaiyse for operation and
use, these instructions contain hints and ruies for the safe use of the
appiiance. We have thereby assumed the user operates the appliance based
on common sense.
A
V
No display
No power to machine
Preparation cycle does not start pj^pigy.
BREW UNIT MISS.
BREWUNIT BLOCK.
DREGDRAW. MISS.
GRINDER BLOCKED
ENERGY SAVING
- Switch on main power swtich
- Close service door
- Check plug, connection, and fuses
► Insert and lock brewing unit
► Clean brewing group
► Insert dregs drawer
► Clean grinding unit
► Press «Standby» _____________
With «coffee powder» selected, only
water comes instead of coffee
Coffee is not hot enough
I No hot water/steam
Hot water / steam nozzle is blocked
Fill a measuring dipper with ground coffee
- Change temperature
- Check brewing unit; descale if necessary
- Clean nozzle with a needle (with machine
switched off and tap closed)
Heating time is too long, not enough water - Descale machine
I Brewing unit cannot be removed
...although the dregs drawer is removed
I Brewing unit cannot be inserted
«Reset» brewing unit
1. Close service door
2. Insert coffee dregs drawer
3. Switch on machine ty. . .,
4. Brewing unit is unlocked ^5. Continue with
DESCALE
(automatic)
Preparing descaling (decalcifying)
Start descaling Clean with ESC
Display: ^ ,
1. Open turning knob
{machine is DESCALING►'■WairapproxV45'mlh:
DESCALING FINISHED^ Close turning knob, press ENTER
WATERTANKEMPTY i Rinse + fill water tank
2. Open turning knob
3. Let tank contents run out
4. Close turning knob, press ENTER
RINSING FINISHED y Presss ESC
NEVER USE VINEGAR
(Could cause damage to machine! Cool
machine, study manufacturer's instructions)
1. Place large receptacle under hot water /
steam nozzle
2. Fill descaling solution into the water tank
according to manufacturer's instructions.
1. Press program key
2. Search for DESCALING with
3. Start cycle with ENTER
TSM SUCCESS MANUAL® - safe to use - easy to understand due to TSM®-Total Security Management and ergonomic communication®
Reset descale display
Cancel with ESC
1. Press programming key
2. SIGNAL DESCAL. search
3. YES search ENTER
CLEANING
Casing
Dregs drawer, drip tray,
fresh water tank
Brewing unit
I Clean weekly
I Never dean the brewing unit
I in the dishwasher!
Use a mild, non-scouring cleaning agent
Wipe with a soft, damp cloth
Rinse under running water
Open service door.
remove drip tray/ grounds container
2. Press PRESS position and remove
brewing unit.
If necessary, unscrew the uppermost
sieve
Clean everything under running warm
water and let dry. Clean service area
Reassemble brewing unit and slide in.
Do NOT press PRESS position
Close service door
1. Loosen knurled screw
2. Remove nozzle, take apart and clean well
3. Dry components well, reassemble
4. Tighten knurled screw
DREGDRAWERFULL
This message appears on the display when the dregdrawer is full
or every 10-15 cups.
When the digital display reads "dregdrawer full" the machine is
able to dispense only hot water ancTsteam (not coffee).
To clear the message, make sure machine is on, remove the
dregdrawer, empty it, wait for 5 seconds and then put back in
place.After this the display reads:
SELEa PRODUa
READY FOR USE
Now the machine is ready to dispense coffee again.
Operating Instructions
Please read these TSM® operating instructions before initial operation. Follow the instructions carefully to insure
constant optimum quality of your drinks and to avoid damages and injuries. Keep this instruction manual handy
where you can readily refer to it. If you pass on your machine to others, be sure that the operating and safety
instructions go with it. Your machine has been conscientiously checked for safety and proper functioning and left
the factory in fault-free working order.
FOR HOUSEHOLD USE ONLY
^ t Please read the safety instructions