66V3L www.philips.
Table of Contents 1. Important ................................................1 1.1 Safety precautions and maintenance...1 1.2 Notational Descriptions.............................2 1.3 Disposal of product and packing material ................................................................3 2. Setting up the monitor.........................4 2.1 Installation...........................................................4 2.2 Operating the monitor ...............................5 2.
1. Important Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational conventions used in this document. IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Recycling Information for Customers 1.3 Disposal of product and packing material Your display is manufactured with high quality materials and components which can be recycled and reused. Waste Electrical and Electronic EquipmentWEEE To learn more about our recycling program please visit www.philips.com/about/sustainability/ recycling.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation 2. Attach the base column with the monitor until it clicks into position. Package contents Register your product and get support at 166V3LA www.philips.com/welcome Quick SmartControl software Monitor drivers ip Phil sE 316 6V1 T H 70 G2011 813 klijke 2011 Konin 2A Start 3.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description 5 AC power input VGA input DVI-D input (available for selected models) Audio input (available for selected models) Kensington anti-theft lock Model 166V3LA: Connect to PC 5 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 7 3. Connect the monitor signal cable to the video connector on the back of your computer.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution, 1366 × 768 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1366 × 768 @ 60 Hz for best results. Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1.
2. Setting up the monitor Remove the base 1. You may use a flathead screwdriver to stick into two release hols on the hinge cover, and gently pry the hinge cover to have it removed. 2. Remove 4 screws and then remove the base from the monitor.
3. Image Optimization Icon based software is ready to enhance your experience with Philips monitors! 3. Image Optimization Installation 3.1 SmartContrast v Follow the instruction and complete the installation. What is it? v You can launch after installation is completed.
3. Image Optimization Start with Standard pane: Adjust menu: v Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. v You can follow the instruction and do the adjustment. v Cancel prompts user if you want to cancel installation.
3. Image Optimization Color menu: v Color Menu allow you to adjust RGB, Black Level, White Point, and Color Calibration. v You can follow the instruction and do the adjustment. v Refer to below table for sub-menu item base on your input.
3. Image Optimization Options>Preferences - Will only be active when selecting Preferences from the dropdown Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on.
3. Image Optimization Options>Audio - Will only be active when selecting Audio from the drop-down Options menu. at startup will not load when this box is unchecked (Disabled). v Enable transparency mode (Windows 7, Vista, XP). Default is 0% Opaque. Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available.
3. Image Optimization Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Task Tray Menu Enabled The task tray menu can be displayed by rightclicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. The task tray has five entries: v Help - Access to User Manual file: Open User Manual file using the default browser window.
3. Image Optimization Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences.
7HFKQLFDO 6SHFLÀFDWLRQV 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.) Response Time (typ.) Optimum Resolution Viewing Angle Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Input Signal Convenience User Convenience OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt 166V3LA: Power On Mode Energy Consumption (EnergyStar 5.
7HFKQLFDO 6SHFLÀFDWLRQV Sleep (Standby) Off Power LED indicator Power Supply 166V3L: Power On Mode Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typ.
7HFKQLFDO 6SHFLÀFDWLRQV Compliance and standards Regulatory Approvals Cabinet Color Finish CE Mark, FCC Class B, GOAST, SEMKO, UL/cUL, BSMI, ISO9241-307 Black Glossy/Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
7HFKQLFDO 6SHFLÀFDWLRQV 4.1 Resolution & Preset Modes Maximum Resolution 1366 x 768 @ 60 Hz (analog input) 1366 x 768 @ 60 Hz (digital input) Recommended Resolution 1366 x 768 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 37.88 800 x 600 60.32 48.36 1024 x 768 60.00 47.71 1366x 768 59.79 Note Please notice that your display works best at native resolution of 1366 x 768 @ 60Hz.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Infomation CE Declaration of Conformity 6. Regulatory Information This product is in conformity with the following standards Lead-free Product v EN60950-1:2006 (Safety requirement of Information Technology Equipment). Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
6. Regulatory Infomation Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation China RoHS ʳ㩾অࠌشཚૻʳ The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warrant Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country ASC Consumer care number Price Germany Siemens I&S +49 01803 386 853 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center ASC Consumer care number Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Estonia NA FUJITSU +372 6519900 Latvia NA “ServiceNet LV” Ltd. +371 7460399 Lithuania NA UAB "Servicenet" +370 7400088 Romania NA Blue Ridge Intl. +40 21 2101969 Serbia & Montenegro NA Kim Tec d.o.o.
7. Customer care and warranty Contact Information for APMEA region: Country Call center ASC Consumer care number Australia NA AGOS NETWORK PTY LTD 1300 360 386 New Zealand NA Visual Group Ltd. 0800 657447 Hong Kong / Macau NA Smart Pixels Technology Ltd. Hong Kong:Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 India NA REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Indonesia NA PT.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs v Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark v Adjust the contrast and brightness on On-Screen Display. 8.2 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.
8. Troubleshooting & FAQs "warm, with a red-white color tone", while a 9300K temperature yields "cool, bluewhite toning". drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g.
8. Troubleshooting & FAQs imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Warning Severe"burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
2011 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
