User manual
Table Of Contents
- 1. Getting Started
- 2. Calling
- 3. Text or number entry
- 4. Messaging
- SMS
- Create message
- Inbox
- Outbox
- Drafts
- Templates
- Allows you to edit or send the template to your contacts. Select a template in the list and the message will appear in the message editor screen. You can edit it and then press LOptions > Send/ Send to many to send it, or press LOptions > Save to sav...
- Message settings
- Memory status
- SMS
- 5. Contacts
- 6. Calls
- 7. Tools
- 8. Settings
- 9. FM Radio
- 10. STK Applications
- Icons & symbols
- Precautions
- Troubleshooting
- The phone does not switch on
- Your phone doesn’t return to the idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You have the feeling that you miss some calls
- The display shows No SIM card
- When attempting to use a feature in the menu, the mobile displays NOT ALLOWED
- Your phone is not charging
- Philips Authentic Accessories
- Trademark Declaration
- SAR Information - International (ICNIRP)
- Limited Warranty
- Declaration of Conformity
18 Tools
7. Tools
This menu contains features and options designed
for your personal use.
Alarm
Your mobile phone has a built-in alarm clock. You
can set up to three separate alarms. To set an
alarm, follow the steps below:
1. Select an alarm and press
L
Edit.
2. Select the status and period: Off/Once/
Mon~Fri/Everyday.
3. Enter the time.
4. Select the alarm ring.
5. Press
L
OK to save the setting.
6. Repeat the above steps to set other alarms.
The alarm clock will ring even if you turned off
your phone. Press
L
Snooze to stop the ringing
temporarily. The alarm will ring again around 2
minutes later.
If you want to turn off the alarm, go through
step 1 and 2 and set it to Off.
Calculator
Your phone has a built-in calculator which you can
use to perform basic calculations. This menu is
mainly used for simple operations such as addition,
subtraction, multiplication and division.
1. Enter the first figure. Press
*
to insert the
decimal point and press to toggle between
negative and positive figures. Press
R
to
delete figures.
2. Use
+
,
-
,
>
,
<
to select Add, Subtract, Multiply,
or Divide.
3. Enter the second figure.
4. Press
L
OK to get the result.
The result of the calculator is indicative. The
calculation accuracy is up to 8 decimal places.
The result is then truncated after the 8th
decimal digit for the next operation.
Calendar
This menu allows you to view the calendar.