User manual
Table Of Contents
- 1. Getting Started
- 2. Calling
- 3. Text or number entry
- 4. Messaging
- SMS
- Create message
- Inbox
- Outbox
- Drafts
- Templates
- Allows you to edit or send the template to your contacts. Select a template in the list and the message will appear in the message editor screen. You can edit it and then press LOptions > Send/ Send to many to send it, or press LOptions > Save to sav...
- Message settings
- Memory status
- SMS
- 5. Contacts
- 6. Calls
- 7. Tools
- 8. Settings
- 9. FM Radio
- 10. STK Applications
- Icons & symbols
- Precautions
- Troubleshooting
- The phone does not switch on
- Your phone doesn’t return to the idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You have the feeling that you miss some calls
- The display shows No SIM card
- When attempting to use a feature in the menu, the mobile displays NOT ALLOWED
- Your phone is not charging
- Philips Authentic Accessories
- Trademark Declaration
- SAR Information - International (ICNIRP)
- Limited Warranty
- Declaration of Conformity
36 SAR Information - International (ICNIRP)
SAR Information - International
(ICNIRP)
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO
RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy defined by the international standards. These recommendations have been
established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the Institue of
Electrical and Electronics Engineers - Standard Associations (IEEE-SA) that forcast a substantial safety margin for
assuring the protection of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption Rate
(SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is 2.0 W/kg in
10g of tissue and, is 1,6W/kg in 1g of tissue by IEEE-SA (IEEE Std 1528) for the head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone transmitting at
its highest certified power level in all tested frequency bands. Although the SAR is determined at its highest certified
power level, the actual SAR levels of the mobile phone while operating are generally below the maximum SAR value.
This is because the phone is designed to operate at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a base station antenna, the lower the power output.
While there may be differences between the SAR levels of various phones and at various positions, they all meet the
international protection standards for exposure to radio waves.
The highest SAR value for this Philips 193 when tested for compliance against the standard was 0.596 W/kg for
ICNIRP recommendation and 0.868 W/kg for IEEE Std 1528.
For limiting the radio waves exposure, it is recommened to reduce the mobile phone call duration or to use a
headset. The purpose of those precautions is to take the mobile phone away from the head and the body.