User manual
Table Of Contents
- 1. Getting Started
- 2. Calling
- 3. Text or number entry
- 4. Messaging
- SMS
- Create message
- Inbox
- Outbox
- Drafts
- Templates
- Allows you to edit or send the template to your contacts. Select a template in the list and the message will appear in the message editor screen. You can edit it and then press LOptions > Send/ Send to many to send it, or press LOptions > Save to sav...
- Message settings
- Memory status
- SMS
- 5. Contacts
- 6. Calls
- 7. Tools
- 8. Settings
- 9. FM Radio
- 10. STK Applications
- Icons & symbols
- Precautions
- Troubleshooting
- The phone does not switch on
- Your phone doesn’t return to the idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You have the feeling that you miss some calls
- The display shows No SIM card
- When attempting to use a feature in the menu, the mobile displays NOT ALLOWED
- Your phone is not charging
- Philips Authentic Accessories
- Trademark Declaration
- SAR Information - International (ICNIRP)
- Limited Warranty
- Declaration of Conformity
4 Getting Started
1. Getting Started
Please read the safety instructions in the
“Precautions” section before using your phone.
To use your phone, you must insert a valid SIM card
supplied by your network operator or retailer. The
SIM card contains your subscription information,
your mobile phone number and a memory in which
you can store phone numbers and messages.
Insert the SIM card
Follow the steps below to insert your new SIM
card. Remember to switch off your mobile phone
before removing the back cover and battery.
Remove the back cover
To insert the SIM card, you must first remove the
back cover. Press on the back cover with your
thumb and slide the cover downwards. Then use
your free hand to lift up the door of the battery
compartment as shown below.
Remove the battery
To remove the battery, lift up the battery from the
bottom as show below.