User manual
Table Of Contents
- 1. Getting Started
- 2. Calling
- 3. Text or number entry
- 4. Messaging
- SMS
- Create message
- Inbox
- Outbox
- Drafts
- Templates
- Allows you to edit or send the template to your contacts. Select a template in the list and the message will appear in the message editor screen. You can edit it and then press LOptions > Send/ Send to many to send it, or press LOptions > Save to sav...
- Message settings
- Memory status
- SMS
- 5. Contacts
- 6. Calls
- 7. Tools
- 8. Settings
- 9. FM Radio
- 10. STK Applications
- Icons & symbols
- Precautions
- Troubleshooting
- The phone does not switch on
- Your phone doesn’t return to the idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You have the feeling that you miss some calls
- The display shows No SIM card
- When attempting to use a feature in the menu, the mobile displays NOT ALLOWED
- Your phone is not charging
- Philips Authentic Accessories
- Trademark Declaration
- SAR Information - International (ICNIRP)
- Limited Warranty
- Declaration of Conformity
6 Getting Started
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged and an alarm will
warn you when the battery level is low. If the
battery is empty, it needs to be charged for 2 or 3
minutes before the battery symbol indicators flash.
Plug the charger into the charger connector at the
top left side of the phone as shown below. Then
plug the other end of the charger into an AC power
socket.
The battery symbol indicates the state of charge.
The charge indicators will scroll when the battery
is charging. The battery is fully charged when the
charge indicators stop scrolling. You can then
disconnect the charger.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage
the battery. The only way to disconnect the
charger is to unplug it, so use an easily accessible
AC power socket. If you would not use your phone
for a period of time, we recommend that you
remove the battery.
You can use your phone while it is charging.
When the battery is completely discharged, the
charge indicators will appear only after a few
minutes of charging.