96V3 www.philips.
Table of Contents 1. 1.1 1.2 1.3 Important ......................................................... 1 Safety precautions and maintenance............... 1 Notational Descriptions ......................................... 2 Disposal of product and packing material.... 3 2. 2.1 2.2 2.3 Setting up the monitor .................................. 4 Installation ....................................................................... 4 Operating the monitor ...........................................
1. Important 1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. • missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) Do not subject the monitor to severe vibration or high impact conditions during operation.
1. Important Important information for Burn-in/Ghost image 1.2 Notational Descriptions • The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: • Always activate a moving screen saver program when you leave your monitor unattended.
1. Important 1.3 Disposal of product and packing material Recycling Information for Customers Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit www.philips.com/about/sustainability/recycling.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2. Attach the base column with the monitor until it clicks into position. 2.1 Installation Package contents Register your product and get support at 196V3LA www.philips.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description AC power input VGA input DVI-D input Kensington anti-theft lock 5 Connect to PC 7 1. 2. 3. 4. 5. Connect the power cord to the back of the monitor firmly. Turn off your computer and unplug its power cable. Connect the monitor signal cable to the video connector on the back of your computer. Plug the power cord of your computer and your monitor into a nearby outlet.
2. Setting up the monitor The OSD Menu Description of the On Screen Display Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution, 1366×768@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1366×768@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor Remove the base 1. You may use a flathead screwdriver to stick into two release holes on the hinge cover, and gently pry the hinge cover to have it removed. 2. Remove the 4 screws and then remove the base from the monitor.
3. Image Optimization 3.2 Philips SmartControl Lite 3. Image Optimization The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through finetuning resolution, Color calibration, Clock/Phase adjustments, RGB White point adjustment, etc. 3.
3. Image Optimization First launch -Wizard • The first time after installation of SmartControl Lite, it will automatically go to Wizard for first time launch. • The wizard will guide you through adjustment your monitor performance step by step. • You can go to Plug-in menu to launch wizard later on as well. • You can adjust more options without wizard by Standard pane. Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution.
3. Image Optimization Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input.
3. Image Optimization First color Calibration Screen: • • • • 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen.
3. Image Optimization Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. Options>Preferences - Will only be active when selecting Preferences from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. • Displays current preference settings.
3. Image Optimization Options>Audio - Will only be active when selecting Audio from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu.
3. Image Optimization Task Tray Menu Enabled The task tray menu can be displayed by rightclicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor panel type Backlight Panel size Aspect ratio Pixel Pitch Brightness SmartContrast Contrast ratio (typ.) Response time (typical) Optimum Resolution Viewing angle Display colors Vertical refresh rate Horizontal Frequency sRGB Connectivity Signal input Input Signal Convenience User Convenience OSD Languages Other convenience Plug & Play Compatibility Stand Tilt TFT-LCD CCFL (196V3), LED (196V3L) 18.5" ( 47.0 cm) 16:9 0.3 x 0.
4. Technical Specifications Power (196V3) On mode Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typ.) Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply Power (196V3L) On mode Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typ.) Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply 19.3W (typ.), 20.81W(max.
4. Technical Specifications Dimension Product with stand (WxHxD) Product without stand (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Temperature range (Nonoperation) Relative humidity Altitude MTBF Environmental ROHS EPEAT EnergyStar Packaging Specific Substances Compliance and standards Regulatory Approvals Cabinet Color Finish 463 x 358 x 204 mm 463 x 294 x 44 mm 2.58kg 2.42kg 3.
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution For 196V3/196V3L 1366 x 768 at 60 Hz (analog input) 1366 x 768 at 60 Hz (digital input) Recommended Resolution For 196V3/196V3L 1366 x 768 at 60 Hz (digital input) H. freq (kHz) 31.47 31.47 37.50 37.88 46.88 48.36 60.02 63.89 79.98 47.71 Resolution 720x400 640x480 640x480 800x600 800x600 1024x768 1024x768 1280x1024 1280x1024 1366x768 V. freq (Hz) 70.09 59.94 75.00 60.32 75.00 60.00 75.03 60.02 75.03 59.
5. Power Management 5. Power Management 5.1 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Information • Products are tested according to rigorous safety standards at impartial laboratories • Electric and magnetic fields emissions as low as normal household background levels • Low acoustic noise emissions (when applicable) 6. Regulatory Information Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
6. Regulatory Information EPEAT (www.epeat.net) “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
6. Regulatory Information FCC Declaration of Conformity Federal Communications Commission (FCC) Notice (U.S. Only) • • • • Declaration of Conformity for Products Marked with FCC Logo, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6. Regulatory Information EN 55022 Compliance (Czech Republic Only) Commission Federale de la Communication (FCC Declaration) • • • • Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
6. Regulatory Information Polish Center for Testing and Certification Notice North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. The equipment should draw power from a socket with an attached protection circuit (a threeprong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
6. Regulatory Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs. 4 der Röntgenverordnung erfüllt sind.
7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7. Customer care and warranty 7.1 Philips' Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control.
7. Customer care and warranty Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects.
7. Customer care and warranty 7.2 Customer Care & Warranty Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country ASC Consumer care number Price Austria Siemens I&S +43 0810 000206 € 0.07 Belgium E Care +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center ASC Consumer care number Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Czech Rep. NA Asupport 800 100 697 Estonia Hungary NA FUJITSU +372 6519900 NA Serware +36 1 2426331 NA Profi Service +36 1 814 8080 Latvia NA “ServiceNet LV” Ltd.
7. Customer care and warranty Contact Information for APMEA region: Country Australia Call center ASC Consumer care number NA AGOS NETWORK PTY LTD 1300 360 386 Bangladesh NA Distributor: Computer Source Ltd (warranty buy-out) 880-2-9141747, 9127592 880-2-8128848 / 52 Cambodia NA Distributor: Neat Technology Pte Ltd (Singapore) (warranty buy-out) 855-023-999992 Hong Kong / Macau NA Smart Pixels Technology Ltd.
8. Troubleshooting & FAQs AUTO button doesn't function • The auto function is applicable only in VGAAnalog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Note The Auto Function is not applicable in DVI-Digital mode as it is not necessary.
8. Troubleshooting & FAQs Horizontal flicker appears • • Green, red, blue, dark, and white dots appears on the screen • The remaining dots are normal characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail. Adjust the image using the “Auto” function in OSD Main Controls. Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs 8.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restart your PC and see if SmartControl Lite can work. Otherwise, you will need to remove and re-install SmartControl Lite to ensure proper driver is installed. Q2. The SmartControl Lite functions worked well before, but it does not work anymore, what can I do? Ans.
8. Troubleshooting & FAQs Q3: What are the .inf and .icm files on the CDROM? How do I install the drivers (.inf and .icm)? 8.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor.
8. Troubleshooting & FAQs Q7: How should I clean the monitor surface? Q10: Are Philips monitors Plug-and- Play? Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Ans.
2011 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trade marks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
