Contact information België/ Belgique 0800 80 190 Gratis/Gratuit ß chat www.philips.com/support България 00800 11 544 24 Česká republika 800 142 840 Bezplatný hovor Danmark 3525 8759 Lokalt opkald ß chat www.philips.com/support Deutschland 0800 000 7520 (kostenfrei) ß chat www.philips.com/support Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση España 900 800 655 Teléfono local gratuito solamente para clientes en España ß chat www.philips.
7 1 Notice 4 2 Important 6 3 Your TV TV controls Remote control Remote control usage 4 5 6 Use your TV 9 9 9 10 Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume Use teletext 11 11 11 11 11 12 13 13 Use more of your TV 14 Access TV menus 14 Change picture and sound settings 14 Use the universal access menu 17 Use advanced teletext features 17 Create and use lists of favourite channels 18 Use the Electronic Programme Guide
1 Notice 2011 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Eng lis h Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
1 2 While you watch TV, press the green button on the remote control. Select one of the following settings: • [Energy saving]: Picture settings that conserve the most energy. • [Mute screen]: If you only want to listen to audio from the TV, you can turn off the TV display. Other functions continue to operate normally. • [Switch off unused sources]: If you connect EasyLink-compliant devices, you can switch them off.
32PFL5206H Eng lis h 3 Your TV 1 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 2 3 TV controls a 4 5 +/-: Adjust volume. b CH +/-: Switch channels. c HOME: Access the home menu. d SOURCE: Select connected devices. Remote control e Power: Switch the TV on or off.
a • (Standby-On) Switch the TV on or to standby. b Play buttons • Control video or music. c d e f g • • • FIND Access the menu to select a TV channel list. CH - / CH + (Previous/Next) Switch channels or navigate through menu pages, tracks, albums or folders. SOURCE Select connected devices. (Mute) Mute or restore audio. h +/- (Volume) • Adjust volume. i 0-9 (Numeric buttons) • Select channels. j SUBTITLE • Enable or disable subtitles. k TEXT • Enable or disable teletext.
If the TV is in standby • Press (Standby-On) on the remote control. Eng lis h 4 Use your TV This section helps you perform basic TV operations. Switch your TV on • Press the power switch on the TV. » There is a short delay before the TV responds. xxPFL3606H/22PFL3206H Switch your TV to standby • Press (Standby-On) on the remote control again. » The remote control sensor on the TV switches to red. Switch your TV off • Press the power switch on the TV again.
• Press (BACK) on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Create and use lists of favourite channels’ on page 18). Press CH +/- on the TV. • xxPFL3606H/22PFL3206H View channel preview You can view a preview of all available channels with the channel grid. • Press FIND. » The channel grid appears. » To preview a channel, select it. » To watch a channel, select it, then press OK.
• Press +/- on the remote control. To mute or unmute sound • • Press Press to mute the sound. again to restore the sound. Eng lis h Adjust TV volume Use teletext 1 • Press Press TEXT. +/- on the TV. xxPFL3606H/22PFL3206H 2 32PFL5206H 3 » The main index page appears. Select a page with one of the following: • Press the Numeric buttons to enter a page number. • Press or to view the next or previous page. • Press the Colour buttons to select a colour coded item.
5 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 2 3 Press . The menu screen appears. Select one of the following, then press OK. • [Watch TV]: If a source other than antenna is selected, switch back to the antenna source • [Programme guide]: Access the electronic programme guide. • [Browse USB]: If a USB device is connected, access the content browser.
• • • • • • • • • • • [Brightness]: Adjust the intensity and details of dark areas. [Colour]: Adjust colour saturation. [Hue]: For NTSC, compensate for colour variations. [Sharpness]: Adjust sharpness in the image. [Noise reduction]: Filter and reduce noise in an image. [Tint]: Adjust the colour balance in an image. [Custom tint]: Customise tint setting (Only available if [Tint] > [Custom] is selected). [Digital Crystal Clear]: Fine-tune each pixel to match surrounding pixels.
[Auto format]: For selected models. (Not for PC mode.) Automatically display the suitable picture format. If not, widescreen is applied. [Auto fill]: For selected models. Adjust the picture to fill the screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC. [Auto zoom]: For selected models. Enlarge the picture to fill the screen. Recommended for minimal screen distortion but not for HD or PC. [Super zoom]: (Not for HD and PC mode.
• • • • [Clear sound]: Enhance the sound clarity. [Bass]: Adjust the bass level. [Treble]: Adjust the treble level. [Surround]: Switch on spatial sound. [Incredible Surround]: (For selected models) Enhanced spatial sound for increased surround effect. [Headphone volume]: (For models with headphones) Adjust headphone volume. [Auto volume levelling]: Automatically reduce sudden volume changes, for example when switching channels. [Balance]: Adjust the balance of the right and left speakers.
1 2 3 Press TEXT. » The teletext screen appears. Press or Press or to select a teletext page. Note • The favourites channel grid is empty until you add channels into the favourites list. to enter a subpage. Select T.O.P. teletext broadcasts View all channels Jump from one subject to another without entering page numbers with Table Of Pages (T.O.P.) teletext broadcasts. T.O.P. teletext broadcasts are available on selected TV channels.
The programme guide is an on-screen guide available for digital channels. It allows you to: • View a list of digital programmes being broadcast • View upcoming programmes • Group programmes by genre • Set reminders when programmes start • Setup preferred programme guide channels Switch on EPG 1 2 Press . Select [Programme guide], then pressOK. » The programme guide appears displaying information about the scheduled programmes.
Use timers Note • To disable the clock, repeat the procedure. Change the clock mode 1 2 3 Press . You can set timers to switch the TV to standby at a specified time. Tip • Set the TV clock before you use timers. Select [Setup] > [TV settings] > [Preferences] > [Clock] > [Auto clock]. Select [Automatic] or [Manual], then press OK. Change the time zone Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a pre-defined duration.
3 4 Select [Setup] > [Channel settings]>[Child lock]. Select [Set code] or [Change code]. » The [Set code] / [Change code] menu appears. Enter your code using the Numeric buttons. » Follow the on-screen instructions to create or change your PIN code. • If you forget your code, enter ‘8888’ to override any existing codes. Lock or unlock one or more channels 3 4 5 6 Press Some digital broadcasters rate their programmes according to age.
2 3 For digital channels, select [Audio language], select the language, then press OK. Play photos and music on USB storage devices For analogue channels, select [Dual I-II], select either language, then press OK. Caution • Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data from the device. Show or hide subtitles 1 2 While you watch TV, press SUBTITLE. Select one of the following, then press OK.
1 2 3 While you view a slide show, press OPTIONS. » The slide show options menu is displayed. Select one of the following, then press OK. • [Start/Stop slideshow]: Start or stop slideshow. • [Slideshow transitions]: Set the transition from one picture to the next. • [Slideshow frequency]: Select the display time for each photo. • [Repeat]/[Play once]: View the pictures in the folder once only, or repeatedly. • [Shuffle off]/[Shuffle on]: View the pictures in sequential order, or at random.
Listen to digital radio channels 1 2 3 Press FIND. » The channel matrix menu is displayed. Press OPTIONS, then select [Select list] > [Radio]. » The radio channel grid appears. Select a radio channel and press OK to listen. Update the TV software 5 To exit, press . Step 2: Download and update the latest software version 1 2 3 4 5 6 Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available.
• If you do not want to update the software, select [Setup] > [Software settings] > [Clear announcement], then press OK. • Note • • If you skip the update, you can update it manually later (see ‘C: Check for updates through digital broadcasts’ on page 25). C: Check for updates through digital broadcasts You can check if there are updates available through digital broadcasts. 1 2 3 Press . Select [Setup] > [Software settings] > [Check on major updates].
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Afterwards, you can re-install and fine tune channels. Update the channel list You can enable automatic update of channels when your TV is in standby mode. The channels stored in your TV are updated every morning according to the channel information in the broadcast.
• 3 If you know the three-digit frequency of the channel, enter it. To search, select [Search], then press OK. When the channel is found, select [Done], then press OK. • To store the channel as a new number, select [Store as new channel], then press OK. • To store the channel as the previously selected channel, select [Store current channel], then press OK. Step 3: Fine-tune analogue channels 1 2 3 Press .
Access CAM services 1 2 3 Insert and activate the CAM (see ‘Insert and activate a CAM’ on page 31). Press OPTIONS. Select [Common interface]. » Applications provided by the digital TV service operator are displayed. Note • This menu option is available only if the CAM is inserted and activated correctly.
Eng lis h 7 Connect devices This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the Quick Start Guide. Note • You can use different types of connectors to connect a device to your TV. c SPDIF OUT Digital audio output to home theatres and other digital audio systems.
f HDMI 1 Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see ‘Connect a computer’ on page 30). Side connections a USB Data input from USB storage devices. b COMMON INTERFACE Slot for a Conditional Access Module (CAM). g EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.
Eng lis h AUDIO PC IN DVI-HDMI cable VGA VGA • PC IN AUDIO Use a Conditional Access Module DVI • A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. HDMI cable and HDMI-DVI adaptor Note • Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. PC IN AUDIO Insert and activate a CAM Caution DVI • Be sure to follow the instructions described below.
• Switch on EasyLink Note • The EasyLink-compliant device must be switched on and selected as the source. • Philips does not guarantee 100% interoperability with 3 4 5 all HDMI CEC devices. Push the CAM in as far as it will go. Reconnect the TV to the power outlet. Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use — this action deactivates digital services.
6 7 8 Select [Setup] > [TV settings] > [EasyLink] > [EasyLink]. Select [On], then press OK. Select [TV speakers], then press OK. Select one of the following, then press OK. • [Off]: Switch off TV speakers. • [On]: Switch on TV speakers. • [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the adjust menu. • [EasyLink autostart]: Turn off TV speakers automatically and streams TV audio to the connected HDMI-CEC audio device.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
• Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. TV screen size (inches) 32 26 Required Required mounting pitch (mm) bolts 200 x 100 200 x 100 4 x M4 (20 mm) 4 x M4 (10 mm) Before you mount, perform these steps: 1 2 To prevent damage to cables and connectors, leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV.
• Dimension (WxHxD): 520 x 380 x 145 (mm) • Weight: 3.3 kg 19PFL3606H • Without TV stand • Dimension (WxHxD): 462.8 x 297.4 x 57 (mm) • Weight: 2.94 kg • With TV stand • Dimension (WxHxD): 462.8 x 330.9 x 149.3 (mm) • Weight: 3.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: Disconnect the power cable from the • power outlet. Wait for one minute then reconnect it. Check that the power cable is securely • connected. The remote control is not working properly: Check that the remote control batteries • are correctly inserted according to the +/- orientation. Replace the remote control batteries if • they are flat or weak.
• Check that the devices are connected properly. Check that the picture settings are • correctly set. The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings. The picture does not fit the screen; it is too big or too small: Try using a different picture format. • The picture position is incorrect: Picture signals from some devices may not • fit the screen correctly.
A age rating analogue channels fine-tune language, change audio language digital radio language, change subtitles dimensions 20, 21 27 21 21 C CAM enable Insert care channels channel list favourites hide or unhide install (automatic) install (manual) rearrange rename reorder switch update channels, fine-tune (analogue) child lock clock common interface computer, see PC Conditional Access Module connect connect device connect, PC connect, USB connectors controls D demo devices watch digital channels 3
location, home or shop M multimedia multimedia, play files mute TV speakers 22 22 32 teletext dual screen enlarge subpages Table Of Pages troubleshoot U P PC, display resolutions picture format picture settings Pixel Plus link position the TV power R recycle reinstall TV remote control overview rename channels reorder channels S screen care settings picture sound shop mode sleeptimer smart picture smart sound software digital broadcast update version sound settings specifications standby subtitle