Register your product and get support at www.philips.
www.philips.com/support Model Serial Country Code Telephone number Tariff Austria +43 0810 000206 Belgium +32 078 250851 Denmark +45 3525 8761 Local call tariff Finland +358 09 2290 1908 Local call tariff France +33 082161 1658 0.09 Germany +49 01803 386 853 0.
1 Notice English Contents 2 2 Important 4 The most updated user manual on line 5 3 Your LCD Monitor with HD TV 6 Front and side controls 6 Remote control 6 4 Use your LCD Monitor with HD TV 9 Switch your TV on/off or to standby Switch channels Watch connected devices Adjust TV volume 9 9 10 10 5 Connect devices 11 Back connector 11 Side connector 13 6 Product information 14 Supported display resolutions Tuner/Reception/Transmission Remote control Power Supported
1 Notice 2009 © Koninklijke Philips Electronics N.V. All rights reserved. Specifcations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V." www.philips.com. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
English Copyright VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association. ® Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. ‘Dolby’ and the double D symbol are trademarks of Dolby Laboratories. (Only applicable to TVs supporting MPEG4-HD standard).
2 Important • Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
• • Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time. If the TV is transported in temperatures below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.
3 Your LCD Monitor with HD TV Remote control Front and side controls 2 23 22 24 5 25 4 3 26 2 27 b SOURCE: Selects connected devices. c MENU/OK : Displays the on-screen menu and confirms a selection in menus. d CH +/-: Switches to the next or previous channel. e VOL+/-: Increases or decreases volume. f Power indicator : Red LED: In standby mode or off. Green LED: Power on. 6 EN 6 3 5 7 10 9 11 12 6 POWER: Switches the TV on or off.
(Standby-On) Switch the TV to standby if the TV is on. • Switch the TV on if the TV is in standby. • b 0-9 ( Numeric buttons ) Select a channel or setting. c PRE CH Return to the previously viewed channel. d TV Press to choose TV mode. e PC Press to choose PC mode. f (Mute) Switch the sound On or Off. g CH Λ / V (Channel Λ / V ) Switch to the next or previous channel. h ZOOM Toggle among screen formats. i SLEEP Toggle to select the preset time to switch the TV to standby mode automatically.
~ TELETEXT Press to open or close the Teletext. INDEX Press to display the index page of Teletext. € SUBTITLE • In TV mode: Press to turn the subtitle on or off. • In Text mode: Press to open the subtitle page. FAV Press to display the Favourite List. ‚ CH-LIST Press to display the Channel List.
This section helps you perform basic TV operations. Switch your TV on/off or to standby Note English 4 Use your LCD Monitor with HD TV •• If you cannot locate your remote control and want to switch on the TV from standby, press CH +/- at the side of the TV. Switch channels To switch on • If the standby indicator is off, press POWER at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby • Press (Standby-On) on the remote control.
Watch connected devices Note •• Switch on the device before selecting it as a source on the TV. »» The TV switches to the selected device. Adjust TV volume Use the source button 1 2 3 Press SOURCE. »» The source list appears. Press the SOURCE, ▲ or ▼ buttons to select a device. Press OK to confirm your choice. »» The sTV switches to the selected device. To increase or decrease volume • Press VOL +/- on the remote control. • Press VOL +/- on the side of the TV.
This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. a PC IN (VGA and AUDIO IN) Audio and video input from a computer. AUDIO Note •• Different types of connectors may be used to VGA connect a device to your TV, depending on availability and your needs. VGA Back connector b EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.
c EXT 1 (SCART) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. e AV OUT (VIDEO OUT and AUDIO OUT L/R) Audio and video output to analogue devices such as another TV or a recording device. AUDIO IN f SPDIF OUT Digital audio output to home theatres and other digital audio systems. d TV ANTENNA Signal input from an antenna, cable or satellite. g HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players.
c VIDEO Composite video input from analogue devices such as VCRs. English Side connector 1 2 3 4 a COMMON INTERFACE Slot for a Conditional Access Module (CAM). d SERVICE USB port, for upgrade firmware purpose only. b AUDIO L/R Audio input from analogue devices connected to VIDEO.
6 Product information Remote control Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/- orientation. •• Replace the remote control batteries if they are flat or weak.
The picture does not fit the screen; it is too big or too small: •• Try using a different picture format. The picture position is incorrect: •• Picture signals from some devices may not fit the screen correctly. Check the signal output of the device. Sound issues There is a picture but no sound from the TV: Note •• If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. •• Check that all cables are properly connected.
EN 17 English
18 EN
2009 © Koninklijke Philips Electronics N.V. All rights reserved. Specifcations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V." www.philips.
