LCD TV Quick Use Guide

ManualsBrandsPhilips ManualsFlat Panel TV20PF8846/98

If you intend to install the LCD TV on the wall. ensure you have the following :

– Standard VESA 100 bracket for LCD TV (not supplied) and four spacers found in the accessory bag.

Thank you for purchasing this Philips LCD Television set. You are now

the proud owner of a LCD TV set which promises full value to you as

a customer. Before you proceed to install the LCD TV, please follow the

steps and diagrams as shown to familiarise yourself with the correct and

safe way of assembling the stand to the TV.

ASSEMBLING THE STAND

INSTALLING LCD TV ON THE WALL

Open back plate cover by gently pulling upwards.

Bottom of swivel base

Check the stand arm is rigid and

properly installed. Place the

set upright.

VESA

Bracket

does not

fit

If your VESA bracket does not fit into the slot

at the rear of the LCD TV, proceed to make

use of the four spacers provided. Note : If VESA

bracket fits into the slot, you need not use the

spacers.

Spacer

x 4

Screw the four spacers to the holes at the

rear of the set. Ensure the spacers are

properly tightened (torque of 1.2N-m or

1 lbf-in).

Tighten

VESA

bracket

to spacers

Close back plate cover by gently

pushing the cover downwards.

Align arrow

to the center

For swivelling of the stand to function properly, adjust the swivel base at

the back of the stand until arrow is aligned in the center. Align the stand

studs into the holes at the bottom of the set. Put in the screws (provided)

into the 2 holes and tightened with a screwdriver.

CAUTION : While putting in the screws, hold onto the stand.

Place the set facing down on a protective

sheet close to the edge of a flat surface.

Ensure you have the following before

you assemble the stand :

– Two screws (supplied with set)

– One Screwdriver (not supplied)

Do the following when installing the LCD TV on the wall :

Place the VESA bracket on the spacers and

tightened with the VESA bracket screws.

LCD TV Quick Use Guide

3139 125 33551

Summary of content (4 pages)

PAGE 1
LCD TV Quick Use Guide Thank you for purchasing this Philips LCD Television set. You are now the proud owner of a LCD TV set which promises full value to you as a customer. Before you proceed to install the LCD TV, please follow the steps and diagrams as shown to familiarise yourself with the correct and safe way of assembling the stand to the TV.
PAGE 2
PRESENTATION OF THE LCD TELEVISION 1 Television keys 2 Adjustable stand 1 PROGRAM VOLUME ¥ 2 : to switch the TV on or off. • VOLUME + / – : to adjust sound level. • PROGRAM + /– : to select programmes. To access or close menus, press the VOLUME + / – keys simultaneously. The PROGRAM + / – keys can be used to select an adjustment and the VOLUME + / – keys make that adjustment. 3 2 The stand has swivel and tilt functions.
PAGE 3
CONNECTING PERIPHERAL EQUIPMENT TO THE LCD TELEVISION CONNECTING THE DVD PLAYER CVI omponent Video inputs provide the highest possible color and picture resolution in the playback of digital signal soure material, such as with DVD players. C 1 2 Jack Panel at bottom of TV Connect the COMPONENT VIDEO Input (Y-green, Pb-blue, Pr-red) sockets at the bottom of the TV to the COMPONENT (Y, Pb, Pr) VIDEO OUT of the DVD player (or similar device).
PAGE 4
CONNECTING PERIPHERAL EQUIPMENT TO THE LCD TELEVISION CONNECTING THE OTHER ACCESSORY DEVICES 1 T his TV also allows for extra accessory device connections for items such as camcorder, cameras or gaming stations. 1 Connect the AV2 input on the rear of the TV to the Audio and Video outputs of the camcorder or accessory device being used. If your device is equipped with S-Video socket, do not connect the Video output (yellow cable), connect the S-Video cable instead.