Register your product and get support at www.philips.
Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
a Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. • • (Power) Switches the TV to standby if it is on. Switches on the TV if it is in standby. b Close caption Displays closed captions settings. c AV Selects connected devices. Product overview d Stereo Switches Stereo and Nicam Stereo to Mono. This section gives you an overview of commonly used controls and functions. e INCR. SURR.
s SLEEP Sets a delay after which the TV switches to standby. Back connectors t TIMER Sets the timers. u Not used. v SAP Selects Secondary Audio Program (SAP), stereo or mono. Controls and indicators POWER a bc a - VOLUME + d CHANNEL e : Switches the product on or off. b Standby indicator c Remote control sensor d -/+ : Increases or decreases volume. e / : Switches to the next or previous channel. 4 EN a TV ANTENNA Signal input from an antenna, cable or satellite.
Eng lis h Side connectors a VIDEO IN Composite video input from analog devices such as VCRs. b AUDIO IN L/R Audio input from analog devices connected to VIDEO.
3 Get started Connect a video recorder: Connect devices This section describes how to connect various devices with different connectors. Note •• Different types of connectors may be used to connect a device to your TV, depending on availability and your needs.
Eng lis h 4 Install channels Automatically install channels This section describes how to search and store channels automatically. Note •• Make sure the TV is in TV mode. 1 2 3 4 Press MENU. Select [Install] > [Auto Program]. Press to start auto search. Press MENU to exit and return to the previous menu. Manually install channels This section describes how to search and store analog TV channels manually. Note •• Make sure the TV is in TV mode. 1 2 3 4 5 6 7 8 Press MENU.
5 Use your product Switch channels This section helps you perform basic operations (see ‘Use more of your product’ on page 9). Switch your TV on/off or to standby To switch on • If the standby indicator is off, press at the front of the TV. • If the standby indicator is red, press on the remote control. To switch to standby • Press on the remote control. »» The standby indicator switches to red. To switch off • Press at the front of the TV. »» The standby indicator switches off.
Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Press MENU. »» The menu screen appears. MAIN Picture Sound Brightness Color Features Contrast Install Sharpness Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Use smart picture Use smart picture to apply pre-defined picture settings.
• • [Color Temp]Introduces more orange tones or blue tones to the picture. [Contrast +]Optimizes the total contrast for improved picture quality. Use smart sound Use smart sound to apply pre-defined sound settings. Use timers You can set timers to switch the TV to standby at a specified time. Set the time 1 2 3 4 1 2 Press SMART repeatedly to cycle through the four settings. • [Personal]Settings are set to your preference. • [Voice]Emphasizes high tones (treble boosted).
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/- orientation. •• Replace the remote control batteries if they are flat or weak.
Sound issues There is picture but no sound from the TV: •• Check that all cables are properly connected. •• Check that the volume is not set to 0. •• Check that the sound is not muted. There is picture but sound quality is poor: •• Check that the sound settings are correctly set. There is picture but sound comes from one speaker only: •• Verify that sound balance is set to the center. Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/ support.
Eng lis h 8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
9 Notice 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.