User manual

EN 28
 [OSD display]: Enable or disable
on-screen information.
 [High security mode]: Select [On] to
restrict access to the professional setup
menu.
 [Welcome Logo]: Enable or disable the
welcome logo that appears when the
TV starts.
 [Hotel Info]: Enable or disable the
welcome message.
 [Browse USB]: Hide or unhide the
[Browse USB] icon in the home menu.
 [Auto scart]: Enable or disable the auto
SCART feature -- this feature allows a
connected SCART device to turn the
TV on or off.
 [Easylink Break-in]/[Easylink
control]/[Easylink Application menu]:
Enable or disable access to various
EasyLink features.
 [Auto USB]: Enable or disable access
to a connected USB storage device.
 [SXP BaudRate]: Select a baud rate
value (38400 or 19200).
 [Enable CI slot]: Enable or disable
access to the Common Interface slot.
 [Enable Teletext]: Enable or disable
access to Teletext.
 [Enable MHEG]: Enable or disable
access to MHEG channels. Applicable
to UK only.
 [Enable EPG]: Enable or disable access
to the Electronic Program Guide.
 [Subtitle On StartUp]: Enable or
disable subtitles when the TV starts.
 [Enable subtitles]: Enable or disable
subtitles
 [Enable Channel Map]: Enable or
disable channel mapping.
 [Source setup]: Lists all supported
connectors on the TV. A disabled
connector will not be visible from the
Source menu.
 [Joint Space]: Enable or disable the
Joint Space feature.
 [Freeze on no signal]: Determine the
TV behavior if there is no TV signal.
 [Simply Share]: Enable or disable the
Simply Share feature.
 [Scrambled Program OSD]: When
disabled, scrambled programs will not
be visible to guests.
More professional setup
settings
Change power settings
Customize the way the TV behaves when it
is switched on.
1. In professional mode, select [Professional
Setup] > [Power settings].
2. Use the Navigation buttons to select a
setting to change, then press OK:
 [Power on]: Determine whether the
TV goes to standby when the TV is
switched on.
 [Low power standby]: Determine
whether standby mode is regular (fast)
or green (low energy).
 [Smart power]: Enable or disable
energy saving mode.
 [Auto Power Down]: Set the TV to
automatically switch off if inactive for
four hours or more.
 [Delayed reboot]: Enable or disable a
delay in standby.
 [Standby Delay Timeout]: Set the
period of standby delay.
Change clock settings
Clock settings are available on certain
models only.
1. In professional mode, select [Professional
Setup] > [Clock settings].
2. Use the Navigation buttons to select a
setting to change, then press OK:
 [Display Standby]: Set the clock to go
into standby after a defined period of
time.
 [Display On]: Enable or disable the
clock.
 [Time Setting]: Manually enter the time.