Register your product and get support at www.philips.
EN BG Addendum When you select a channel from the channel grid, a preview is not displayed. Допълнение Когато изберете канал от мрежата с канали, на дисплея не се показва преглед. CS Dodatek Při výběru kanálu z mřížky není náhled zobrazen. DA Tillæg Når du vælger en kanal fra kanaloversigten, er der ikke nogen eksempelvisning. DE Nachtrag Wenn Sie einen Sender aus der Senderliste auswählen, wird keine Vorschau angezeigt.
RU Приложение При выборе канала из таблицы каналов предварительный просмотр не отображается. SV Tillägg När du markerar en kanal i kanalöversikten visas ingen förhandsgranskning. SK Príloha Keď vyberiete kanál z mriežky kanálov, ukážka sa nezobrazí. TR Ek Kanal ızgarasından bir kanal seçtiğinizde, bir önizleme görüntülenmez. UK Додаток Під час вибору каналів з таблиці каналів попередній перегляд не відображається. SL Dodatek Ko na seznamu kanalov izberete kanal, ni prikazan predogled.
PS TS .mpg .mpeg .vob .ts MP4 MKV Container AVI FLV MP3 MKV AAC (.mov and .3gpp extensions are not supported) .mkv File Extensions .mp4 .avi .flv .mp3 .wav .aac .mp4 .m4a .mp4 Container File Extensions 1920x1080 1920x1080 MPEG4 SP@L 3.0/ ASP@HL 4.0 WMV9 1920x1080 30 1280x720 352x288 1920x1080 Motion JPEG Sorenson H.264 BP/MP/HP LV 4.0 NA NA NA NA NA 30 1920x1080 MPEG4 SP@L 3.0/ ASP@HL 4.0 NA 30 1920x1080 H.264 BP/MP/HP LV 4.
6 1 Notice 2 2 Important 4 Your TV 7 7 8 9 3 TV controls Remote control Remote control usage 4 Use your TV Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your TV Access TV menus Add device to the home menu Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Use the universal access menu Use advanced teletext features Create and use lists of favou
1 Notice 2012 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
English Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Environmental efforts Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling.
3 Your TV English xxPFL3xx6 1 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 2 3 TV controls 4 +/-: Adjust volume. a (Home): Access the home menu. b c CH +/-: Switch channels. DesignLine Tilt 1 d Power: Switch the TV on or off.
g Remote control • (Mute) Mute or restore audio. h +/- (Volume) • Adjust volume. 1 i 0-9 (Numeric buttons) • Select channels. 2 17 3 4 16 15 14 5 13 6 7 12 8 j SUBTITLE • Enable or disable subtitles. k TEXT • Enable or disable teletext. l m • OPTIONS Access options for the current activity or selection. • (Back) Return to the previous menu or exit a function. n OK • Confirm an entry or selection. 9 o 10 11 p • • (Navigation buttons) Navigate through menus and select items.
English Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.
4 Use your TV DesignLine Tilt This section helps you perform basic TV operations. Switch your TV on • Press the power switch on the TV. »» There is a short delay before the TV responds. xxPFL5xx6 xxPFL5xx6/xxPFL4xx6 If the TV is in standby • Switch your TV to standby • xxPFL3xx6 10 EN Press (Standby-On) on the remote control. Press (Standby-On) on the remote control again. »» The remote control sensor on the TV switches to red.
xxPFL3xx6 • English Switch your TV off Press the power switch on the TV again. »» The remote control sensor on the TV switches off. »» For xxPFL5xx6, the TV no longer consumes energy. »» For xxPFL4xx6, xxPFL3xx6, and DesignLine Tilt, though the TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet or turn off the power switch.
Watch connected devices Note Adjust TV volume • Press +/- on the remote control. • Press •• Before you select a device as a source, switch the device on. Select a device from the source list 1 Press SOURCE. +/- on the TV. xxPFL5xx6/xxPFL4xx6 2 3 »» The source list appears. Press to select a device. Press OK to confirm your choice. »» The TV switches to the selected device. xxPFL3xx6 DesignLine Tilt To mute or unmute sound • • 12 EN Press Press to mute the sound.
1 2 3 English Use teletext Press TEXT. »» The main index page appears. Select a page with one of the following: • Press the Numeric buttons to enter a page number. • Press or to view the next or previous page. • Press the Colour buttons to select a colour coded item. • Press (BACK) to return to a previously viewed page. Press TEXT to exit teletext. Note •• For UK users only: Some digital TV channels offer dedicated digital text services (for example, BBC1).
5 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Press . The menu screen appears. Add device to the home menu After you connect a device, add it to the home menu. 1 2 3 4 5 Press . Select [Add new device]. Follow the onscreen instructions to add the device to the home menu. »» The device is displayed in the home menu. To watch the device, switch it on, then select it in the home menu.
Use smart picture If a device is no longer connected to the TV, remove it from the home menu. 1 2 3 1 2 3 4 5 Press . Select a device to remove. OPTIONS. Press Select [Remove device], then press OK. Select [Remove], then press OK. »» The selected device is removed from the home menu. Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually.
1 2 3 Press . Select [Setup] > [TV settings] > [Picture], then press OK. • Select one of the following settings, then press OK. [Smart picture]: Access predefined smart picture settings. [Reset]: Reset to factory default settings. [Contrast]: Adjust the intensity of backlight areas, while the video contents are kept unchanged. [Brightness]: Adjust the intensity and details of dark areas. [Colour]: Adjust colour saturation. [Hue]: Compensate for colour variations.
1 2 3 Press ADJUST. Select [Picture format], then press OK. [Wide screen]: Scale 4:3 format to 16:9. Select a picture format, then press OK. Summary of picture formats [Unscaled]: For HD and PC mode only, and in selected models only. Allow maximum sharpness. Some distortion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results. The following picture settings can be configured.
Manually adjust sound settings 1 2 3 • • • • • • • • • • • Press . Select [Setup] > [TV settings] > [Sound], then press OK. »» The [Sound] menu appears. Select one of the following settings, then press OK. [Smart sound]: Access predefined smart sound settings. [Reset]: Reset to factory default settings. [Clear sound]: Enhance the sound clarity. [Bass]: Adjust the bass level. [Treble]: Adjust the treble level. [Surround]: Switch on spatial sound.
Access the teletext options menu Access the teletext features through the teletext options menu. 1 2 3 Select teletext subpages A teletext page can contain several subpages. Subpages are displayed next to the main page number. 1 Press TEXT. »» The teletext screen appears. Press TEXT. »» The teletext screen appears. 2 3 Press OPTIONS. »» The teletext options menu appears. Select T.O.P. teletext broadcasts Select one of the following options, then press OK.
Create and use lists of favourite channels Manage the favourites list You can create a list of your preferred TV channels so that you can find those channels easily. 2 3 4 5 View only the list of favourite channels 1 2 3 While you watch TV, press FIND. »» The channel matrix menu is displayed. Press OPTIONS. Select [Select list] > [Favourites], then press OK. »» Only channels in the favourites list appear in the channel grid.
You can set or clear reminders, change the day, and access other useful options in the programme guide options menu. 1 2 3 4 Press . Select [Programme guide], then press OK. Press OPTIONS. »» The programme guide menu appears. Select one of the following options, then press OK. • [Set reminder] / [Clear reminders]: Set or clear programme reminders. • [Change day]: Set the programme guide day. • [More info]: Display programme information. • [Search by genre]: Search TV programmes by genre.
Change the clock mode 1 2 3 Press . Select [Setup] > [TV settings] > [Preferences] > [Clock] > [Auto clock]. Select [Automatic] or [Manual], then press OK. Change the time zone Note •• This option is only available if you select [Auto clock] > [Automatic] (in countries with clock transmission data). 1 2 3 4 Press Use timers You can set timers to switch the TV to standby at a specified time. Tip •• Set the TV clock before you use timers.
You can prevent your children from watching certain programmes or channels by locking the TV controls. Lock or unlock one or more channels 1 2 Set or change code 1 2 3 4 Press . Select [Setup] > [Channel settings] > [Child lock]. 3 Select [Set code] or [Change code]. »» The [Set code] / [Change code] menu appears. 4 Enter your code using the Numeric buttons. »» Follow the on-screen instructions to create or change your PIN code.
View Scenea Change language You can display a default picture as the wallpaper on your TV. You can also load another picture as the wallpaper. If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer. Depending on your broadcaster, you can change the audio language, subtitle language, or both, for a TV channel. Multiple audio languages, subtitles, or both, are broadcast through teletext or DVB-T digital broadcasts.
View a slide show of your photos 1 Note •• When you select a subtitle language in a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled. 1 2 3 4 While you watch TV, press • OPTIONS. Select [Subtitle language], then press OK. Select a subtitle language. Press OK to confirm. Play photos, music and videos on USB storage devices Caution • 1 2 not supported, nor is it responsible for damage or loss of data from the device.
Listen to music 1 2 3 In the USB browser, select [Music], then press OK. To control play, press the play buttons: • to play. • to pause. • or to play the previous or next track. • or to search forward or backward. • to stop. While you play music, press OPTIONS to access one of the following settings, then press OK. • [Stop playback]: Stop music play. • [Repeat]: Play a song once or repeatedly. • [Shuffle on] / [Shuffle off]: Play songs in sequence or at random. • [Show info]: Display the file name.
1 2 3 Press FIND. »» The channel matrix menu is displayed. Press OPTIONS, then select [Select list] > [Radio]. »» The radio channel grid appears. Select a radio channel and press OK to listen. Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available.
Step 3: Update the TV software 1 2 3 4 5 6 7 8 Connect your USB storage device to the TV. »» The TV detects the USB flash drive and starts to scan for software version. If a message prompts you to update the software, follow the on-screen instructions to update the TV software. If the message is not displayed, continue with the following steps: Press . Select [Setup] > [Software settings] > [Local updates]. Select the file that you downloaded, then press OK to update the TV software manually.
Start a TV demo Use the preferences menu to customise your TV settings. You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. 1 2 3 Press . Select [Setup] > [TV settings] > [Preferences]. Select one of the following, then press OK. • [Menu language]: Select a menu language. • [Sleep timer]: Switch the TV to standby after a pre-defined duration.
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Afterwards, you can re-install and fine tune channels. Automatically install channels You can search and store channels automatically. Step 1: Select your menu language 1 2 3 Press . Select [Setup] > [TV settings] > [Preferences] > [Menu language], then press OK. Select a language, then press OK.
Manually install digital channels You can search and store analogue TV channels one at a time. You can search and store digital TV channels one at a time. Step 1: Select your system 1 2 Note •• If your system settings are correct, skip this step. 1 2 3 Press . Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] > [System], then press OK. Select the correct system for your country or region, then press OK.
Rearrange channels After you install channels, you can rearrange the order in which they appear. 1 2 3 4 5 6 7 While you watch TV, press FIND. »» The channel matrix menu is displayed. Press OPTIONS. »» The channel options menu appears. Select [Reorder], then press OK. Select the channel to rearrange, then press OK. »» The selected channel is highlighted. Move the highlighted channel to its new location, then press OK. Press OPTIONS. Select [Done reordering], then press OK.
This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the Quick Start Guide. b EXT 1 (RGB and CVBS) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. English 7 Connect devices Note •• You can use different types of connectors to connect a device to your TV.
e PC IN (VGA and AUDIO IN) Audio and video input from a computer. g HDMI 2 (For selected models) Digital audio and video input from highdefinition digital devices such as Blu-ray players. VGA VGA AUDIO IN LEFT/RIGHT VGA/DVI f HDMI 1 ARC Digital audio and video input from highdefinition digital devices such as Blu-ray players. Also outputs TV audio to other EasyLink-compliant devices, such as home theatre systems.
a AUDIO L/R Audio input from analogue devices connected to VIDEO. d HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. e b VIDEO Composite video input from analogue devices such as VCRs. English Side connections (Headphone) Stereo audio output to headphones or earphones. f COMMON INTERFACE Slot for a Conditional Access Module (CAM). c USB Data input from USB storage devices.
HDMI cable and HDMI-DVI adaptor • Connect a computer AUDIO IN LEFT/RIGHT VGA/DVI Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: DVI Note •• Connections via DVI or VGA require an additional audio cable.
Use a Conditional Access Module Access CAM services A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. 2 3 Note •• Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. Insert and activate the CAM (see ‘Insert and activate a CAM’ on page 37). Press English 1 OPTIONS. Select [Common interface]. »» Applications provided by the digital TV service operator are displayed.
Use Philips EasyLink Get the most out of your HDMI-Consumer Electronic Control (CEC) compliant devices with Philips EasyLink enhanced control features. If your HDMI-CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control.
If you connect an HDMI-CEC compliant device that includes speakers, you can choose to hear the TV from those speakers instead of the TV speakers. When you play content from an EasyLink compliant home theatre, if you want to mute the TV speakers automatically, turn on EasyLink mode. If the connected device is HDMI Audio Return Channel (ARC) compliant, and you connect the device through an HDMI ARC connector, you can output TV audio through the HDMI cable. You do not need an additional audio cable.
Hear TV audio through another device If you connect an EasyLink- compliant device that has speakers, you can get the most out of those speakers if you listen to TV audio through them. If the connected device is HDMI-ARC compliant, and you connect the device through an HDMI ARC connector, you can output TV audio through the HDMI cable. You will not need an additional audio cable.
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Supported TV mounts Product specification To mount the TV, purchase a Philips TV mount or a compatible TV mount. Design and specifications are subject to change without notice. Warning •• Follow all instructions provided with the TV mount. TP Vision Netherlands B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount, perform these steps: 1 2 3 To prevent damage to cables and connectors, leave a clearance of at least 2.2 inches or 5.
32PFL3406H • Without TV stand • Dimension (WxHxD): 787.5 x 505.1 x 80.5 (mm) • Weight: 7.8 kg • With TV stand • Dimension (WxHxD): 787.5 x 547.26 x 221.43 (mm) • Weight: 9.4 kg 26PDL49x6H • Without TV stand • Dimension (WxHxD): 641.5 x 428.3 x 38.7(mm) • Weight: 8.30 kg • With TV stand • Dimension (WxHxD): 641.5 x 428.3 x 166.4 (mm) • Weight: 8.98 kg 22PDL49x6H • Without TV stand • Dimension (WxHxD): 532.5 x 357 x 36.6 (mm) • Weight: 5.6 kg • With TV stand • Dimension (WxHxD): 532.
9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/- orientation. •• Replace the remote control batteries if they are flat or weak.
If reception on only one channel is poor, fine tune this channel. There is poor picture quality from connected devices: •• Check that the devices are connected properly. •• Check that the picture settings are correctly set. The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings. The picture does not fit the screen; it is too big or too small: •• Try using a different picture format.
10 Index display, wallpaper E A age rating analogue channels language, change audio language 23 2323 24 24 C CAM enable Insert care channels channel list favourites install (automatic) rearrange rename reorder switch update child lock clock common interface computer, see PC Conditional Access Module connect connect device connect, PC connect, USB connectors controls D demo devices add watch digital channels digital radio language, change subtitles dimensions 46 24 EN 37 37 5 11 20 30 32 31 32
M multimedia multimedia, play files mute TV speakers P PC, display resolutions picture format picture settings Pixel Plus link position the TV power 24 29 25 25 40 39 41 17 16 39 29 41 15 R recycle reinstall TV remote control onscreen overview rename channels reorder channels S Scenea, see screen saver Scenea, switch on screen care screen saver settings assistant picture sound shop mode sleeptimer smart picture smart sound 6 30 38 8 31 32 24 24 5 24 software digital broadcast update version s
Info for UK only. Information about how to re-tune your TV during the digital TV switchover. Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see the next page to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK.
Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover. If you do not re-tune your channels when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune. You should re-tune your TV every few months to check for any new channels. If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by switchover, and you won’t need to re-tune.
Contact information Austria/Österreich 0820 40 11 33 (€ 0,145/min*) *Aus dem österreichischen Festnetz. Kosten von anderen Netzbetreiber oder mobile können variieren Belarus/Беларусь 8 10 800 2000 00 04 Belgium/België/Belgique 070 700 035 (€ 0,15/min*) *Additionele kosten kunnen in rekening worden gebracht door uw (mobiele) netwerk provider *Sauf le surcoût éventuel selon opérateur du réseau mobile Bulgaria/България (02) 4916273 (national*) *Połaczenia z tel.
© 2012 TP Vision Netherlands B.V. All rights reserved.