User Manual

Universal Card Reader (UCR)
Using the Reader
Identify the Storage Media
In Windows, each inserted flash card or USB-connected storage device will be identified as a
Removable Drive and assigned with a drive letter in My Computer. You can click on icon representing
the drive to gain access to the files contained on your flash cards or USB-connected storage devices.
In the Mac OS, each inserted flash card or USB-connected storage device will be represented as a
disk icon on the desktop.
Reading/Writing Storage Media
You may write to and copy files to, from and among flash cards, USB-attached storage devices and
your host computer as you would with an ordinary disk drive. You can also copy files between cards in
different slots.
To use the reader:
1. Insert your storage card or USB storage device.
2. Open My Computer or your File Explorer.
3. Double-click on the proper Removable Disk icon.
4. Access images and files on your storage cards just as you open, copy, move, or delete images
and files on your hard disk drive.
WARNING: Do not insert or extract storage cards while the green LED is
flashing.
RETURN TO TOP OF THE PAGE
Disconnecting the Reader
For Windows
Use the Safely Remove Hardware icon in the notification area of the taskbar to safely remove the
device before unplugging. The notification area is to the right of the taskbar where you usually see the
current time displayed. These steps are not required for Windows 98SE.
1. In the notification area, right-click on the Safely Remove Hardware hot-plug icon.
2. Select the device you want to unplug and click Stop.
3. When Windows notifies you that it is safe to do so, unplug the reader from your computer.
For Mac OS
Remember to drag the disk icon representing the storage card to the trash box before extracting the
card from the reader or unplugging the reader unit from the USB port.
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/230W/english/230w5/install/ucr.htm (4 of 5)2004-09-21 7:58:49 AM