User manual

23
7 Szabályozási információk
RestrictiononHazardousSubstances
statement(India)
Thisproductcomplieswiththe“IndiaE-waste
Rule2011”andprohibitsuseoflead,mercury,
hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers
inconcentrationsexceeding0.1weight%and
0.01weight%forcadmium,exceptforthe
exemptionssetinSchedule2oftheRule.
E-WasteDeclarationforIndia
This symbol on the product or on its packaging
indicates that this product must not be
disposed of with your other household waste.
Instead it is your responsibility to dispose of
your waste equipment by handing it over to
a designated collection point for the recycling
of waste electrical and electronic equipment .
The separate collection and recycling of your
waste equipment at the time of disposal will
help to conserve natural resources and ensure
that it is recycled in a manner that protects
human health and the environment. For more
information about where you can drop off your
waste equipment for recycling in India please
visit the below web link.
http://www.india.philips.com/about/sustainability/
recycling/index.page
Information for U.K. only
WARNING-THISAPPLIANCEMUSTBE
EARTHED.
Important:
This apparatus is supplied with an approved
moulded 13A plug. To change a fuse in this type
ofplugproceedasfollows:
1. Removefusecoverandfuse.
2. Fit new fuse which should be a BS 1362
5A,A.S.T.A. or BSI approved type.
3. Retitthefusecover.
Ifthettedplugisnotsuitableforyoursocket
outlets, it should be cut off and an appropriate
3-pinplugttedinitsplace.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
NOTE:The severed plug must be destroyed
to avoid a possible shock hazard
should it be inserted into a 13A socket
elsewhere.
(A)
(B)