240B4 !!!! www.philips.
Table of Contents 1. Important ...............................................1 1.1 Safety precautions and maintenance .1 1.2 Notational Descriptions ............................2 1.3 Disposal of product and packing material ...............................................................3 2. Setting up the monitor .......................4 2.1 Installation .........................................................4 2.2 Operating the monitor ..............................6 2.
1. Important Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic EquipmentWEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents 240B4 2. Snap in the base in the VESA mount area.
2. Setting up the monitor 3. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes. located at the bottom of the base, and secure the base to the column tightly.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons 7 8 6 5 4 3 2 1 3 2 4 5 1 Kensington anti-theft lock 2 VGA input 3 DVI input 4 DisplayPort(Optional) 5 AC power input 3 6 Zero power Switch 7 USB downstream 8 USB upstream 7 6 5 4 2 1 Connect to PC 1. Connect the power cord to the back of ! Switch monitor’s power ON and OFF. 2. Turn off your computer and unplug its power cable. Access the OSD menu.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 × 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1200 @ 60 Hz for best results. 110mm Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 3. While keeping the release button pressed, tilt the base and slide it out. 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 2 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 1 Note This monitor accepts a 100mm x 100mm mounting interface. 2. Remove the screws from hinge cover.
3. Image Optimization 3. Image Optimization 2. Keep pressing to toggle among # Photo, Movie, Game, Economy and Off. 3.1 SmartImage 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can <#=< > ! What is it? 4. When SmartImage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable SmartImage with the button at the front bezel of your monitor.
3. Image Optimization washout in brighter areas maintaining a dynamic natural values for the ultimate video display. 3.3 Philips SmartControl Premium The new SmartControl Premium software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through \ " Clock/Phase adjustments, RGB White point adjustment, etc.
3. Image Optimization You can adjust more options without wizard by Standard pane. Start with Standard pane Adjust menu Adjust Menu allows you to adjust Brightness, Contrast, and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. Color menu Color Menu allows you to adjust RGB, Black Level, White Point, Display Gamma, Calibration, SmartImage, and SmartKolor. You can follow the instruction and do the adjustment.
3. Image Optimization 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen.
3. Image Optimization First Color Calibration Screen Eco Power menu Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File > Presets pane. Options menu Cancel closes the UI and returns to the plug in page. Options>Preferences - Will only be active when selecting Preferences from the dropdown Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization menu. Disabled removes SmartControl Premium from the right click context menu. Option>Auto Pivot. Enable Task Tray icon is checked (On) by default. Enable context menu shows the task tray menu for SmartControl Premium. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display Exit. Run at Startup is checked (On) by default.
3. Image Optimization - Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug-in menu. Help menu - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization Context Sensitive menu J > 7 The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. Help - Access to User Manual file: Open User Manual file using the default browser window. ! - Displays the tech support page. Chec# $ - Takes the user to PDI Landing and checks the user’s version against the most current available.
3. Image Optimization When the window and mouse cursor are within the region, the region will become highlighted. 3.4 SmartDesktop Guide SmartDesktop Note SmartDesktop is in SmartControl Premium. Install SmartControl Premium and select SmartDesktop from Options. If the outline of the region is not visible when dragging the window, “Show windows contents while dragging” is disabled. To enable: 1. In Control Panel, click System. 2.
3. Image Optimization Title Bar Options *$ – Displays the outline grid on the desktop for the current partition. Desktop partition can be accessed from the title bar of the active window. This provides a quick and easy way to manage the desktop as well as sending any window to any partition without having to drag and drop. Move the cursor into the active window’s title bar to access the drop down menu. + / ;+ / – Enables/disables the drag and drop auto align feature.
3. Image Optimization % $ & $ ' – In some cases, the user may have sent multiple windows to the same partition. Find Windows will show all open windows and move the selected window to the forefront. # – Desktop Partition shows the current selected partition and allows the user to quickly change to any of the partitions shown in the drop down. *$ – Displays the outline grid on the desktop for the current partition.
3. Image Optimization Name Description Image Full Desktop Applies all settings to the entire desktop. Vertical Assesses the screen resolution and divides the display into two evenly sized vertical regions. } ~ ! Horizontal Assesses the screen resolution and divides the display into two evenly sized horizontal regions.
3. Image Optimization Name Description Image Horizontal Split Top Assesses the screen resolution and divides the display into two evenly sized horizontal regions, the top region is single, the bottom region is spilt into two evenly sized regions For 90 Partition 1 on right side Vertical Partition 2&3 on left side Vertical. For 270 Partition 1 on left side Vertical Partition 2&3 on right side Vertical.
4. PowerSensor™ is within 100 cm or 40 inches of the display, step up signal strength when wearing black or other dark clothes. You can return to the default mode at any time (Setting 3). 4. PowerSensor™ How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect userpresence. When the user is in front of the monitor the monitor operates normally, at the predetermined settings that the user has set- i.e.
5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.
Off Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Temperature range (Non-operation) Relative humidity MTBF 0.68 BTU/hr 0.68 BTU/hr 0.68 BTU/hr On mode: White, Standby/Sleep mode: White (blinking) Built-in, 100-240VAC, 50-60Hz 555.0X432.8X227.3 mm 555.0X388.0X64.8 mm 5.83 kg 3.97 kg 8.
5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (analog input) 1920 x 1200 @ 60 Hz (digital input) Recommended Resolution 1920 x 1200 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 44.77 1280x720 59.86 63.89 1280x1024 60.02 79.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Regulatory Infomation headsets) Acoustic performance – protection against sound spikes (headsets) and fan noise (projectors, computers) Ergonomically designed keyboard (notebooks) 7. Regulatory Information Congratulations! J J"# " \ $ J Electrical Safety, minimal electro-magnetic Emissions Third Party Testing All certified product models have been tested in an independent, accredited laboratory.
7 Regulatory Infomation Lead-free Product CE Declaration of Conformity Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
7. Regulatory Infomation Energy Star Declaration " X approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® ! Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
7 Regulatory Infomation Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
7. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
7 Regulatory Infomation China RoHS ⦃ֱՓ⫼ᳳ䰤 The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request.
8. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
8 Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country ASC Consumer care number Price Germany Siemens I&S +49 01803 386 853 € 0.
8 Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center ASC Consumer care number Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Estonia NA FUJITSU +372 6519900 Latvia NA “ServiceNet LV” Ltd. +371 7460399 Lithuania NA UAB "Servicenet" +370 7400088 Romania NA Blue Ridge Intl. +40 21 2101969 Serbia & Montenegro NA Kim Tec d.o.o.
8. Customer care and warranty Contact Information for APMEA region: Country Australia Call center NA ASC Consumer care number AGOS NETWORK PTY LTD 1300 360 386 New Zealand NA Visual Group Ltd. 0800 657447 Hong Kong / Macau NA Smart Pixels Technology Ltd. Hong Kong:Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 India NA REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Indonesia NA PT.
9. Troubleshooting & FAQs 9. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 9.1 Troubleshooting Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
9. Troubleshooting & FAQs Image appears blurred, indistinct or too dark Adjust the contrast and brightness on On-Screen Display. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. 9.
9. Troubleshooting & FAQs Ans.: It might be your graphic adaptor is not compatible with the SmartControl Premium. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Premium, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported.
9. Troubleshooting & FAQs Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments via OSD? Ans.: Simply press the OK button, then select 'Reset' to recall all of the original factory settings. Q6: Is the LCD screen resistant to scratches? Ans.
9. Troubleshooting & FAQs In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
© 2012 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V.
