240B7 www.philips.
Table of Contents 1. Important �����������������������������������������������1 1.1 Safety precautions and maintenance �1 1.2 Notational Descriptions ���������������������������3 1.3 Disposal of product and packing material ���������������������������������������������������������������3 2. Setting up the monitor �����������������������5 2.1 Installation ���������������������������������������������������������5 2.2 Operating the monitor ������������������������������7 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : • Looking at something varying distances after a long period focusing on the screen. • To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. • If your monitor gets wet, wipe it with dry cloth as soon as possible.
1. Important Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “afterimage” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document.
1. Important Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents 240B7 240B7 2. Hold the stand with both hands. (1) Gently attach the stand to the VESA mount area until the latch locks the stand. Monitor User’s Manual 使用产品前请阅读使用说明 Contents: © 2017 User’s Manual Monitor drivers 保留备用 nkli Koni (2) Gently attach the base to the stand.
2.
2. Setting up the monitor Connect to PC 2.2 Operating the monitor 1. Connect the power cord to the back of the monitor firmly. Description of the control buttons 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your monitor into a nearby outlet. 240B7 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor Description of the On Screen Display Main menu What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification Swivel This monitor is designed for optimal performance at its native resolution, 1920 × 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1200 @ 60 Hz for best results. +175 -175 Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 240B7QPTEB 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Extend the monitor base to its maximum height. 150mm Pivot 2. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Then lift the monitor stand. 0 90 3. While keeping the release button pressed, tilt the base and slide it out.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation.
3. Image Optimization 1. Press to launch the SmartImage on screen display. 3. Image Optimization 2. Keep pressing to toggle among Office, Photo, Movie, Game, Economy, LowBlue Mode and Off. 3.1 SmartImage 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are seven modes to select: Office, Photo, Movie, Game, Economy, LowBlue Mode and Off.
3. Image Optimization color washout in brighter areas maintaining a dynamic natural values for the ultimate video display. • Game: Turn on over drive circuit for best response time, reduce jaggy edges for fast moving objects on screen, enhance contrast ratio for bright and dark scheme, this profile delivers the best gaming experience for gamers.
4. PowerSensor™ 4. PowerSensor™ • • • • How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user-presence. When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e.
4. PowerSensor™ returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
5.Daisy-chain function Note 1. Depending on the capabilities of your graphic cards, you should be able to daisy chain multiple displays with various configurations. Your display configurations will depend on your graphic card capabilities. Please check with your graphic card vendor and always update your graphic card driver. 5. Daisy-chain function (Available for 240B7QPTEB) Daisy-chain enables multiple monitor connections This Philips display is equipped with DisplayPort 1.
5.Daisy-chain function Display Resolution (standard 60 Hz) DisplayPort Default 1680 x 1050 1920 x 1080 (1080p) or 1920 x 1200 2560 x 1600(WQXGA) 3840 x 2160(Ultra HD, 4K) or 4096 x2160 (4K x 2K) DisplayPort1.1 DisplayPort1.1 Maximum number of display chaining(including 1st motherboard connection display) Clone mode (DP1.1 Extend mode (DP1.2) or DP1.2) 5 5 4 4 DisplayPort1.1 DisplayPort1.
6.Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Optimum Resolution Viewing Angle Display Colors Flicker Free Picture Enhancement Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode Connectivity IPS Technology LED 24.1" W (61.1 cm) 16:10 0.270(H) mm x 0.270(V) mm 20,000,000:1 1920 x 1200 @ 60 Hz 178° (H) / 178° (V) @ C/R > 10 16.
6.Technical Specifications Power(240B7QPJEB) Consumption Normal Operation Sleep (Standby) Off Off (AC switch) Heat Dissipation* Normal Operation Sleep (Standby) Off Off (AC switch) On Mode(ECO mode) PowerSensor Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC, 50Hz 25.7 W (typ.) 25.5 W (typ.) 26.2 W (typ.) <0.5 W <0.5 W <0.5 W <0.3 W <0.3 W <0.
6.
6.Technical Specifications 6.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (analog input) 1920 x 1200 @ 60 Hz (digital input) Recommended Resolution 1920 x 1200 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 35.16 800 x 600 56.25 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.08 800 x 600 72.19 47.73 832 x 624 74.55 48.
7.Power Management 7. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
8.Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty 8.
8.Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
8.
8.Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
9.Troubleshooting & FAQs 9. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 9.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
9.Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
9.Troubleshooting & FAQs Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 1920 x 1200 pixels. • Q5: What if I get lost when I am making monitor adjustments via OSD? Ans.: Simply press the OK button, then select 'Reset' to recall all of the original factory settings. Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK.
9.Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? 11500K. With settings in the 5000K range the panel appears "warm, with a red-white color tone", while a 11500K temperature yields "cool, bluewhite toning". Ans.: Uninterrupted display of still or static images over an extended period may cause "burn-in", also known as "after-imaging" or "ghost imaging", on your screen.
9.Troubleshooting & FAQs Q13: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/lock status as shown below illustrators. Attention Monitor control unlocked Attention Monitor control locked Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
© 2017 Koninklijke Philips N.V. All rights reserved. This product was manufactured and brought to the market by or on behalf of Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Specifications are subject to change without notice.
