e-Manual Philips LCD Monitor Electronic User’s Manual file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/INDEX.
Safety and Troubleshooting Information • Safety Precautions and Maintenance • FAQs Safety and Troubleshooting Information • Troubleshooting • Regulatory Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Safety and Troubleshooting Information ● ● extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. ❍ Temperature: 0-40°C 32-95°F ❍ Humidity: 20-80% RH IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.
FAQs (Frequently Asked Questions) • Safety and Troubleshooting FAQs (Frequently Asked Questions) • General FAQs • Compatibility with Other Peripherals • LCD Panel Technology • Ergonomics, Ecology and Safety Standards • Troubleshooting • Regulatory Information General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? A: Recommended resolution for Philips 23.6 ": 1920x1080 @60Hz. 1.
FAQs (Frequently Asked Questions) Q4: How do I adjust the resolution? A: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments? A: Simply press the OK button, then select 'Reset' to recall all of the original factory settings.
FAQs (Frequently Asked Questions) between different device (e.g. digital cameras, monitors, printers, scanners, etc) c. User Define; the user can choose his/her preference color setting by adjusting red, green blue color. *A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue.
FAQs (Frequently Asked Questions) LCD Panel Technology Q12: What kind of wide-angle technology is available? A: Currently, the IPS type panels offer the best Contrast Ratio, compared to MVA, or PVA technologies. TN panels have improved over the years, but still cannot match the Contrast Ratio offered by IPS panel.
FAQs (Frequently Asked Questions) file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/safety/saf_faq.
Troubleshooting Troubleshooting •Safety and Troubleshooting •FAQs •Common Problems This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Troubleshooting ● Check that the signal cable is properly securely connected to the graphics board or PC. ● Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. Image vibrates on the screen Vertical flicker appears ● Horizontal flicker appears ● Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. ● Adjust the contrast and brightness on On-Screen Display.
Troubleshooting The "power on" light is too strong to disturb me. ● You can adjust “power on” light using the power LED of Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/safety/saf_troub.
Regulatory Information • TCO'03 Information Regulatory Information • TCO'06 Information *available for selective models • Recycling Information for Customers • Waste Electrical and Electronic Equipment-WEEE • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S.
Regulatory Information EPEAT “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
Regulatory Information - MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields) - TCO'03, TCO Displays 5.0 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: TCO: TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Energy Star Declaration This monitor is equipped with a function for saving energy which supports the VESA DPM standard.
Regulatory Information Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
Regulatory Information ● Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
Regulatory Information RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Regulatory Information Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETURN TO TOP OF THE PAGE Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
Regulatory Information Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your sales representative. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
Regulatory Information 环保使用期限 此标识指期限(十年),电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄 或突变, 电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、 财产造成严 重损害的期限. RETURN TO TOP OF THE PAGE Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
About This Manual • About This Guide About This Manual • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
About This Manual Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Product Information • Your LCD Monitor • Smartimage Product Information • SmartContrast Your LCD monitor • SmartSaturate • SmartSharpness • Technical Specifications Congratulations on your purchase and welcome to Philips. To fully benefit from the support that Philips offers, register your product at. www.philips.
Product Information •SmartContrast 25000:1 •Contrast ratio(typ.) 1000:1 • Response time (typical) 5 ms • Optimum Resolution 1920x1080 @ 60Hz • Viewing angle 170° (H) / 160° (V) @ C/R > 10 • Display colors 16.
Product Information • Product with stand ( WxHxD) 561x400x210mm • Product without stand ( WxHxD) 561x336x68mm • Box dimension ( WxHxD) 620x440x168mm Weight • Product with stand 5.70kg • Product without stand 5.00kg • Product with packaging 7.
Product Information 1920 x 1080 at 60 Hz (digital input) B. Recommended Resolution - For 244E1 1920 x 1080 at 60 Hz (digital input) 1920 x 1080 at 60 Hz (analog input) 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.469 720*400 70.087 31.469 640*480 59.940 35.000 640*480 67.000 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 46.875 800*600 75.00 48.363 1024*768 60.004 60.023 1024*768 75.029 63.981 1280*1024 60.020 79.
Product Information VESA Mode Video H-sync V-sync Power Used LED color Active ON Yes Yes < 50 W (typ.) White Sleep OFF No No < 0.8 W (typ.) White Switch Off OFF - - < 0.8W (typ.) Off This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. *This data is subject to change without notice. The native resolution of the monitor is 1920 x 1080, By default, your monitor has 100% (max.
Product Information 1) Tilt RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/product.
Philips Pixel Defect Policy • Product Features Philips Pixel Defect Policy • Technical Specifications • Resolution & Preset Modes Philips' Flat Panel Monitors Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control.
Philips Pixel Defect Policy defects and several types of sub pixel defects within each category. Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern.
Philips Pixel Defect Policy Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Philips Pixel Defect Policy Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/pixel.
SmartControl SmartControl II (Selective Models) • Product Information • Philips Pixel Defect Policy • Philips SmartControl ll Philips SmartControl II • System support and requirement • Installation SmartControl II is monitor-based software with an easy-to-use on-screen graphic interface that guides you through finetuning resolution, color calibration and other display settings including brightness, contrast, clock & phase, position, RGB, white point and - on models with onboard speakers - volume adjustm
SmartControl ● ● ● Follow the instruction and complete the installation. You can lauch after installation complete. If you want to launch later, you can either click the shortcut on desktop or toolbar. Start to use: 1. First launch –Wizard ● ● ● ● The first time after installation of SmartControl II, it will automatically go to Wizard for first time launch. The wizard will guide you through adjustment your monitor performance step by step. You can go to Plug-in menu to launch wizard later on as well.
SmartControl ● ● ● Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation.
SmartControl Color menu: file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/SMART.
SmartControl ● ● ● ● Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input.
SmartControl 1. 2. 3. 4. 5. "Show Me" starts color calibration tutorial. Start - starts the 6-step color calibration sequence. Quick View loads the before/after images. To return to Color home pane, click the Cancel button. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen.
SmartControl 1. 2. 3. 4. Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File>Presets pane. Cancel closes the UI and returns to the plug in page. SmartImage - Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled. Plug-Ins - Asset Management Pane will only be active when selecting Asset Management from the drop-down Plug Ins menu.
SmartControl Displays Assent Management information on Managment, Description, Serial Number, Current Timing, Domain Name, and Asset Management Status. To return to Plug-in home pane select the plug-in tab. Plug-Ins - Theft Deterence Pane will only be active when selecting Theft from the drop-down Plug Ins menu. To enable Theft Deterrence, clicking Enable Theft button brings up the following screen: file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/SMART.
SmartControl 1. 2. 3. 4. User can enter PIN between 4 and 9 digits numbers only. After entering PIN, Accept button takes user to the pop-up dialog box on the following page. Minimum minutes set to 5. Slider set to 5 by default. Does not require the display be attached to a different host to go into theft mode. Once a PIN is entered and accepted, the following dialog box appears: ● Click on No button takes user to the following screen.
SmartControl ● Click on Yes button takes user to secure web site landing page. After creating PIN, the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button: 1. Theft Deterrence Enabled is displayed. 2. Disable Theft opens pane screen on next page. 3. PIN Options button only available after user creates PIN, button opens secure PIN web site. Disable Theft button opens the following pane: 1. After entering PIN, Accept button disables PIN. 2.
SmartControl Options>Preferences - Will only be active when selecting Preferences from the drop-down Options menu. On a nonsupported display capable of DDC/CI, only the Help and Options tabs are available. 1. Displays current preference settings. 2. A checked box enables the feature. The check box is a toggle. 3. Enable Context Menu on desktop is checked (On) by default. Enable Context menu displays SmartControl II selections for Select Preset and Tune Display in the desktop right-click context menu.
SmartControl 1. Display the Source instruction pane and current input source setting. 2. On single input displays, this pane will not be visible. Options>Auto - Will only be active when selecting Volume from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Option>Auto Pivot file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/SMART.
SmartControl Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/SMART.
SmartControl Context Sensitive menu The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. The Context Menu has four entries: 1. SmartControll II - When selected the About Screen is displayed. 2. Select Preset - Provides a hierarchical menu of saved presets for immediate use. A check mark shows the currently selected preset. Facoty Preset can also be called from the drop down menu. 3.
SmartControl The task tray menu can be displayed by right-clicking on the SmartControl II icon from the task tray. Left Click will launch the application. The task tray has five entries: 1. 2. 3. 4. 5. Help - Access to User Manual file: opnes User Manual file using the default browser window. Technical Support - displays the tech support page. Check for Update - takes the user to PDI Landing and checks the user's version against the most current available.
SmartControl Q1. I change the monitor on a PC to a different one and the SmartControl becomes un-usable, what do I do? A. Restart your PC and see if SmartControl can work. Otherwise, you will need to remove and re-install SmartControl to ensure proper driver is installed. Q2. The SmartControl functions well at the beginning, but it is not workable, what can I do? A. If the following actions were executed, the monitor driver may need to be re-installed.
SmartControl RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/product/SMART.
Installing Your LCD Monitor Installing Your LCD Monitor • Front View Produt Description • Connecting to Your PC Front View Product Description • The Base • Getting Started • Optimizing Performance 1 To switch monitor's power On and Off 2 To access OSD menu 3 VOL/ To adjust OSD menu and the volume of the display. 4 To change the signnal input source 5 Automatically adjust the horizontal position, vertical position, phase and clock settings/Return to previous OSD level.
Installing Your LCD Monitor RETURN TO TOP OF THE PAGE Rear View 1 Kensington anti-thief lock 2 AC power input 3 HDMI 4 VGA input 5 DVI-D input (available for selective models) 6 PC Audio in RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/install.
Installing Your LCD Monitor Optimizing Performance ● For best performance, ensure that your display settings are set at 1920 x 1080, 60Hz. Note: You can check the current display settings by pressing the 'OK' button once. The current display mode is shown in OSD main controls called RESOLUTION. RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/install.
Connecting to Your PC Connecting to Your PC • Front View Product Description Accessory Pack • Accessory Pack Unpack all the parts. • Connecting to Your PC • Getting Started • Optimizing Performance • The base Power cord DVI cable (Optional) EDFU pack VGA cable PC Audio cable RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/connect.
Connecting to Your PC Connecting to Your PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. * available for selective models * available for selective models 2) Connect to PC (a) Turn off your computer and unplug its power cable. file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/connect.
Connecting to Your PC (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/connect.
The Base The Base : • Front View Product Description • Accessory Pack Attach and Detach the Base Attach the Base • Setting up and connecting your monitor • Getting Started 1) Firmly grasp the monitor with both hands. Attach the monitor stand to the monitor column until the tabs "click" into place before releasing the height adjustable column.
The Base Detach the Base You can remove the monitor body from the base and mount it on a wall, the commercial available arm with VESA standard hole (100x100mm)or Philips optional Super Ergo Base (for selective model). Remove the base Place the monitor face on a safe surface, push down on the release button and pull the base stand away from the monitor body. 2) Remove the base from the LCD monitor. file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/base.
The Base 3) VESA mounting holes(100x100mm) RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/install/base.
Getting Started Your LCD Monitor : Getting Started • Front View Product Description • Setting Up and Connecting Your Monitor • Getting Started Getting Started • Optimizing Performance Use the information file ( .inf) for Windows® 2000/XP/Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 2000/XP/Vista. This information file ( .
Getting Started 7. 8. 9. 10. 11. 12. 13. 14. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. Click on the 'Driver' tab and then click on 'Update Driver...' button. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. Click on the 'Have disk...' button, then click on the 'Browse...
On-Screen Display On-Screen Display • Description of the On-Screen Display • The OSD Tree Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below : Basic and simple instruction on the control keys.
On-Screen Display RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/osd/osddesc.
On-Screen Display Resolution notification This monitor is designed for optimal performance at its native resolution, 1920x1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920x1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/osd/osddesc.
Customer Care & Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom Poland EASTERN EUROPE: Czech Republic Hungary Russia Slovakia Slovenia Turkey LATIN AMERICA: Argentina Brasil NORTH AMERICA: CANADA USA PACIFIC: Australia New Zealand ASIA: China Hong Kong India Indonesia Korea Malaysi
Your Philips F1rst Choice Warranty file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/warranty/war_1st.
F1rst Choice Contact Information F1rst Choice Contact Information Country Code Telephone number Tariff Austria +43 0810 000206 € 0.07 Belgium +32 078 250851 € 0.06 Denmark +45 3525 8761 Local call tariff Finland +358 09 2290 1908 Local call tariff France +33 082161 1658 € 0.09 Germany +49 01803 386 853 € 0.09 Greece +30 00800 3122 1223 Free of charge Ireland +353 01 601 1161 Local call tariff Italy +39 840 320 041 € 0.
Consumer Information Centers Consumer Information Centers Argentina Australia Brasil Canada New Zealand Belarus Bulgaria Croatia Czech Republic Estonia United Arab Emirates Hong Kong Hungary India Indonesia Israel Latvia Lithuania Malaysia Middle East + North Africa New Zealand Pakistan Romania Russia Serbia & Montenegro Singapore Slovakia Slovenia South Africa South Korea Taiwan Philippines • Thailand Turkey Ukraine Vietnam Eastern Europe BELARUS Technic al Center of JV IBA M. Bogdanovich str.
Consumer Information Centers CROATIA Renoprom d.o.o. Ljubljanska 4, Sv. Nedjelja,10431 Croatia Tel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu HUNGARY Profi Service Center Ltd. 123 Kulso-Vaci Street, H-1044 Budapest ( Europe Center ) Hungary Tel: +36 1 814 8080 m.andras@psc.
Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Kim Tec d.o.o. Viline vode bb, Slobodna zona Beograd L12/3 11000 Belgrade Serbia Tel. +381 11 20 70 684 SLOVAKIA General Consumer Information Center 0800004551 Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava Tel: +421 2 49207155 Email: servis@datalan.
Consumer Information Centers TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com LLC Topaz Company Topaz-Service Company, Mishina str. 3, Kiev Ukraine-03151 Tel: +38 044 245 73 31 Latin America ARGENTINA Azopardo 1480. (C1107ADZ) Cdad. de Buenos Aires Tel: 0800 3330 856 Email: CIC.monitores@Philips.
Consumer Information Centers AUSTRALIA Company: AGOS NETWORK PTY LTD Address: 4/5 Dursley Road, Yenorra, NSW 2161, Australia Tel: 1300 360 386 Fax: +61-2-80808147 Email: philips@agos.com.au Service hours: Mon.~Fri. 8:00am-7:30pm NEW ZEALAND Company: Visual Group Ltd. Address: 28 Walls Rd Penrose Auckland Phone: 0800 657447 Fax: 09 5809607 E-mail: vai.ravindran@visualgroup.co.nz Service Hours: Mon.~Fri. 8:30am~5:30pm Asia HONG KONG/Macau Company Name: PHK Service Limited Address: Flat A, 10/F.
Consumer Information Centers Indonesia Company Name: PT. Gadingsari elektronika Prima Address: Kompleks Pinang 8, Jl. Ciputat raya No. 8F, Pondok Pinang. Jakarta Tel: 021-750909053, 021-750909056 Fax: 021-7510982 E-mail: gepta@cbn.net.id Service hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat.
Consumer Information Centers Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec. 1, Chang Hsing Rd, Lu Chu Hs, Taoyuan, Taiwan R.O.
Consumer Information Centers 4th Level Cyberzone, Annex Bldg. SM City North EDSA, Quezon City 441-1610 MDR Microware Sales Inc. Cebu Branch N. Escario corner Clavano St., Cebu City Phils. # 255-4415/ 255-3242/253-9361/4124864 to 67 Sun # 0922-8210045 to 46 Davao Office: C. Arellano St., Davao City 8000 082- 225-3021/225-3022 Sun# 0922-8210015 CDO Office: 1445 Corrales Ext.,CDO City 088-856-8540/856-8541 Sun # 0922-8210080 Iloilo Office: C. Lim Comp., Gomez St.
Consumer Information Centers Middle East + North Africa Company: AL SHAHD COMPUTER L.L.C Address: P.O.BOX: 29024, DUBAI, UNITED ARAB EMIRATES TEL: 00971 4 2276525 FAX: 00971 4 2276242 E-mail: shahd52@eim.ae Service hours: Sat.~Thur. 9:00am~1:00pm & 4:00pm- 8:00pm Israel Company: Eastronics LTD Address: 13 Rozanis St. P.O.B. 39300, Tel Aviv 61392 Israel Tel: 1-800-567000 call free in Israel; (972-50-8353722 after service hours until 20:00) Fax: 972-3-6458759 E-mail: eastronics@eastronics.co.
International Guarantee file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/warranty/war_intl.
Download and Print Download and Print • Installing your LCD monitor driver • Download and Printing Instructions Installing Your LCD monitor driver System requirements: ● ● PC running Windows® 2000 , Windows® XP, Windows® Vista or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Readme.txt" file before installing. Add” refer to http://www.p4c.philips.com/ to download the latest version of monitor drivers.” This page provides an option to read the manual in .pdf format.
Download and Print Printing instructions: To print the manual: With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF THE PAGE file:///D|/cd manual/philips/244E1/lcd/manual/ENGLISH/download/download.