Gaming Monitor Momentum 3000 24M1N3200Z 24M1N3200V 24M1N3200ZS 24M1N3200ZA 24M1N3200VS 24M1N3200VA 24M1N3200VL EN User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.
Table of Contents 1. Important ������������������������������������� 1 1.1 Safety precautions and maintenance ����������������������������������1 1.2 Notational Descriptions ��������������3 1.3 Disposal of product and packing material ��������������������������������������������4 2. Setting up the monitor �������������� 5 2.1 Installation ��������������������������������������5 2.2 Operating the monitor ����������������6 2.
1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
• • Do not knock or drop the monitor during operation or transportation. • Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours.
• 1.2 Notational Descriptions known as “after-imaging” or “ghost imaging”, on your screen. The following subsections describe notational conventions used in this document. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burnin” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2 Install the base 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation 1 Package contents Gaming Monitor Momentum 3000 2. Hold the stand with both hands. (1) Gently attach the base to the stand. 24M1N3200Z 24M1N3200V 24M1N3200ZS 24M1N3200ZA 24M1N3200VS 24M1N3200VA 24M1N3200VL Quick start (2) Use your fingers to tighten the screw located at the bottom of the base.
2.2 Operating the monitor 3 Connecting to your PC 1 Description of the control buttons 1 2 3 4 5 6 Earphone-Hang Press to switch power on. Press more than 3 seconds to switch power off. Access the OSD menu. Confirm the OSD adjustment. Adjust the Game Setting. 1 AC/DC power input Adjust the OSD menu. 2 HDMI 1 input 3 HDMI 2 input Change the signal input source. 4 DisplayPort input Adjust the OSD menu. 5 Audio out SmartImage Game menu.
2 Description of the On Screen Display Main menu Sub menu Game Setting What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Swivel (24M1N3200Z/24M1N3200V/ 24M1N3200ZA/24M1N3200VA) Both technologies are used to match the refresh rate of the monitor to the graphic cards. Providing the smoothest gaming experience by reducing or eliminating judder, tearing, and stuttering. Enabling Adaptive-Sync from the On-Screen Display menu will automatically activate the appropriate technology depending on the graphics card installed in your computer: If using an AMD Radeon graphics card, FreeSync will be enabled.
2.3 Remove the Base Assembly for VESA Mounting Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen.
3. Image Optimization 2. Toggle to the up or down to select between the smartImage modes. 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation. There are multiple selections: FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, EasyRead and Off. 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
• • • 3.2 SmartContrast LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity Studies have shown that just as ultraviolet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light.
4. NVIDIA® G-SYNC® Compatible (24M1N3200ZA) When playing intense games with high refresh rates, screen tearing may appear without optimal graphics synchronization. Certified as NVIDIA® G-SYNC® Compatible, variable refresh rate (VRR) reducing screen tearing and syncing your monitor’s refresh rate with your graphic card’s output for a smoother gaming experience. Scenes appear instantly, objects look sharper, and gameplay is smooth, giving you a stunning visual experience and a serious competitive edge.
5. AMD FreeSyncTM Premium • • • • • AMD Radeon R9 290X AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.
Swivel Height adjustment Pivot -45 / +45 degree (24M1N3200Z/24M1N3200ZA/ 24M1N3200V/24M1N3200VA) 130 mm (24M1N3200Z/24M1N3200ZA/ 24M1N3200V/24M1N3200VA) -90 / +90 degree (24M1N3200Z/24M1N3200ZA/ 24M1N3200V/24M1N3200VA) Power (24M1N3200Z/24M1N3200ZS) AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , at 115VAC , at 230VAC, 50Hz 50Hz 50Hz Normal Operation 24 W (typ.) 24 W (typ.) 24 W (typ.) Sleep (Standby mode) 0.5 W 0.5 W 0.5 W Off mode 0.3 W 0.3 W 0.
Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply Dimensions Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) 0.3 W 0.3 W 0.
Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish -20°C to 60°C 10% to 90% 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6.1 Resolution & Preset Modes Note Please notice that your display works best at native resolution of 1920 x 1080. Maximum Resolution 1920 x 1080 @ 165 Hz (HDMI/DP) For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. Recommended Resolution 1920 x 1080 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.
7. Power Management 24M1N3200V/24M1N3200VL/ 24M1N3200VA/24M1N3200VS If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
8. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 2 1 0 >15mm 3 BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 5 or fewer 2 or fewer 0 >15mm 5 or fewer TOTAL DOT DEFECTS Total bright or black dot defects of all types ACCEPTABL
8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important information manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
9. Troubleshooting & FAQs • Make sure the computer is turned on. Visible signs of smoke or sparks • 9.1 Troubleshooting • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. • Do not perform any troubleshooting steps Disconnect the monitor from mains power source immediately for safety Contact with Philips customer service representative immediately.
“after-imaging” or “ghost imaging” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. • Image appears distorted. Text is fuzzy or blurred. • Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution.
Q5: What if I get lost when I am making monitor adjustments via OSD? 11500K temperature yields "cool, bluewhite toning". 2. sRGB: This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc). Ans.: Simply press the button, then select 'Setup' -> 'Reset' to recall all the original factory settings. Q6: Is the LCD screen resistant to scratches? 3.
"ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burn-in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
2021 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
