Register your product and get support at series www.philips.
Contents 1 Get Support 3 13 Specifications 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 4 4 4 2.1 Update Software 2.2 Software Version 3 Quick Guide 44 13.1 Power (For 4022, 4032, 4132 Series) 13.2 Power (For 4232 Series) 44 13.3 Reception 44 13.4 Display Resolution 44 13.5 Display Input Resolution 45 13.6 Sound 45 13.7 Multimedia 45 13.8 Connectivity 46 5 14 Troubleshooting 3.1 Remote Control 5 3.
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 1 Get Support 1.1 Identify and Register your TV For more TV troubleshooting and frequently asked questions (FAQs)... Identify your TV - TV model number and serial Go to http://philips-tvconsumercare.kxondemand.
2 Look for OAD updates (Over-the-air Download) Software Scan to search for an Over-the-air software update. 2.1 (Home) > Settings > Update software > for OAD updates. Update Software Search for Updates 2.2 (Home) > Settings > Update software > Search for updates. Software Version You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space. Make sure that write protection is switched off.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1. Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2. Playback keys - Play , to playback - Pause , to pause playback - Stop , to stop playback - Rewind , to rewind - Fast forward , to go fast forward - Record , to record now 1.
5. BACK To switch back to the previous channel you selected. To close a menu without changing a setting. 3.2 6. EXIT To switch back to watching TV. The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. IR sensor 7. OPTIONS To open or close the Options menu. 8. OK key To confirm a selection or setting. 9.
through the list of sources, including the tuner selection. The menu will disappear automatically.
4 Wall Mounting Setting Up 4022 series TV 4.1 Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . Read Safety Read the safety instructions first before you use the TV. To read the instructions, in chapter Safety and Care. User manual, see 4.2 TV Placement Tips on Placement - 22Pxx4022 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm) - 24Pxx4022 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.
mm, Maximum 10.5 mm) - 32Pxx4032 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm) improper mounting or any mounting that results in accident or injury. Preparation 4132 series TV First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).
- 22PFx4232 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm) Preparation For 22"/24" First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Switch On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On Press the power button on the side or the back of the TV. Switch to standby To switch the TV to Standby, press on the remote control. To switch off the TV completely, disconnect the power plug.
For 22"/24" 5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
* Network port is only for xxPxTxxx2/05 series ** Satellite port is only for xxPxSxxx2 series * Network port is only for xxPxTxxx2/05 series Copy protection HDMI HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management). For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m. HDMI - DVI 5.
Switch on EasyLink (Home) > Settings > General settings > EasyLink > EasyLink > On Operate HDMI CEC-compatible devices with TV remote control For 22"/24" (Home) > Settings > General settings > EasyLink > EasyLink remote control > On Note: - EasyLink might not work with devices from other brands. - The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link.
For 22"/24" 5.5 Audio Device HDMI ARC Only HDMI 1 on the TV have Return Channel). HDMI ARC (Audio If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
5.6 Computer HDMI - DVI * Network port is only for xxPxTxxx2/05 series If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. ** Satellite port is only for xxPxSxxx2 series Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
slot permanently. Ideal Settings (Home) > Advanced > Settings > Computer When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card. Picture > Set to On to have the ideal picture setting for use your TV as a computer monitor. The CAM and smart card are exclusively for your TV.
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. USB Hard Drive 5.
searches for the network connection. 6. A message will be shown when the connection is successful. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. Network Settings (Home) > settings Settings > Network > View network You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.
6 Switch Source 6.1 Source List - To open the sources menu, press SOURCES . - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press SOURCES again. 6.2 Rename Device - Only HDMI, VGA (if available), SCART (if available) sources can be renamed or replace device icon 1. Press SOURCES , and select HDMI or VGA (if available). 2. Press Edit and press OK. 3.
installlation > channels 7 Channels Search for channels > Update 7.1 Re-install all channels About Channels and Switch Channels (Home) > Settings > Antenna/cable installlation > Search for channels > Re-install channels 1. Select the country where you are now and press OK. 2. Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install. 3. Select Digital and analogue channels, Only digital channels, or Only analogue channels. 4. Select Start and press OK to update channels.
Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you received a specific symbol rate value, select Manual. frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. If you use DVB-C to receive channels, the option Symbol rate mode is available.
installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select Unicable for 1 or for 2 satellites at the start of the installation. Satellite (if available) About Installing Satellites Up to 4 Satellites - LNB settings You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
new channels. Satellite Channel List (Home) > Settings > Satellite channel list - Polarisation - Select the polarisation you need. Satellite installlation > - Symbol rate mode - Select Manual to enter symbol rate. You can select your preferred satellite channel list when press LIST to open satellite channels. - Frequency - Enter the frequency for the transponer. Satellites can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country.
Channel List Copy To not installed TVs Introduction Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Channel list copy is intended for dealers and expert users. To a TV that is not yet installed With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV.
1. While watching a channel, press OPTIONS. 2. Press OPTIONS again to close. press (right). 3. Select Mono or Stereo and press OK. 4. Press (left) repeatedly if necessary, to close the menu. Subtitles To switch on Subtitles, press SUBTITLE. Status You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. Select Status to view technical information on the channel.
7. Select Done when complete the editing. 8. Press LIST again to close the channel list. Search Channels LIST > OPTIONS > Search channel Select Channel Filter You can search for a channel to find it in a long list of channels. LIST 1. Press , to switch to TV. > OPTIONS > Select channel filter Select one of channel combinations showing in the channel list. 2. Press LIST to open the current channel list. 3. Press OPTIONS > press OK.
Reorder Channels - T.O.P. overview To open T.O.P. Text. You can reorder, reposition channels in the Favourite channel list. - Enlarge To enlarge the Text page for comfortable reading. 1. While watching a TV channel, press LIST > OPTIONS > list. - Reveal To unhide hidden information on a page. Select channel - Cycle subpages To cycle subpages when these are available. 2. Select Antenna - Favourite channels , Cable Favourite channels or Satellite - Favourite channels*, and press OK. 3.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1. Press TV GUIDE and select a future or ongoing programme. 2. Press the colour key Record . To cancel a recording… 1. Press TV GUIDE and select the programme set for recording. 2.
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. 9 Recording and Pause TV 9.1 What You Need 9.
9.3 Schedule a Recording Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. What You Need You can pause a digital TV broadcast and resume watching it a bit later. To record a programme… 1. Press TV GUIDE. 2. On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions Set the transition from one picture to the next. 10.1 From a USB Connection Slideshow frequency Select the display time for each photo. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Repeat, Play once View the pictures repeatedly or once only.
folder. Music Options Options for playing music... Video Options Repeat, Play once Play songs repeatedly or once. During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Shuffle on, Shuffle off Play songs in sequence or at random. Subtitle language Play the subtitle language if available. Charater set Select one of system for charater. Audio language Play the audio language if available.
11 11.3 Open TV Setting Menus Quick Settings and All Settings 11.1 Press SETUP key on the remote control to find frequently used settings in Quick settings menu. Quick settings menu: Home Menu Overview - Picture style: Select one of preset picture styles for ideal picture viewing. Press (Home) to select one of below menus, then press OK. - Picture format: Select one of preset picture format which fits the screen.
- Movie - Ideal for watching movies - Game - Ideal for gaming Adjust the colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright colours. (Home) > Advanced > You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness.
Screen Edges (Home) > Settings > Picture > Format and edges > Picture format > Screen edges Gamma (Home) > Settings > Picture > Advanced > Contrast > Gamma With Screen edges, you can slightly enlarge the picture to hide distorted edges. Press the arrows (up) or (down) to set a nonlinear setting for picture luminance and contrast.
volume of a connected headphone separately. Clear Sound (Home) > Settings > Sound > Advanced > Clear sound Surround Sound (Home) > Settings > Sound > Select On to improve the sound for speech. Ideal for news programmes. Surround Sound Select the surround sound effect for the internal TV speakers. Digital Output Settings Digital output settings are available for optical and HDMI ARC sound signals.
the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is 60ms. CAM Operator Profile (Home) > Settings > Operator Profile General settings > CAM To switch on operator profile for CI+/CAM for easy channel installation and updates. Eco Settings HDMI-CEC Connection - EasyLink Set energy saving level (Home) > saving Settings > Eco settings > Energy Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control.
Redo full TV installation , and set TV status back to Clock the first time you switch on (Home) > Settings > settings > Reinstall TV (Home) > Settings > language > Clock General Enter PIN code and select Yes, the TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minute Correct clock automatically (Home) > Settings > Region and language > Clock > Auto clock mode - The standard setting for the TV clock is Automatic.
or programmes. Universal Access Settings (Home) > Settings > Note: If you forgot your PIN code, you can override the current code use 8888 and enter a new code. Universal access With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people. Lock for Programme (Home) > rating Switch on universal access settings Settings > Child lock > Parental Set a minumum age to watch rated programmes.
12 4032 series TV Environmental 24PHx4032 - Energy Efficiency Class : A+ - Visible Screen Size : 60 cm / 24 inch - On Mode Power Consumption (W) : 18 W - Annual Energy Consumption (kWh) * : 27 kWh - Standby Power Consumption (W) **: 0.30 W - Display Resolution (Pixels) : 1366 x 768 12.1 European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
- Standby Power Consumption (W) **: 0.30 W - Display Resolution (Pixels) : 1920x1080 49PFx4132 - Energy Efficiency Class : A+ - Visible Screen Size : 123 cm / 49 inch - On Mode Power Consumption (W) : 51 W - Annual Energy Consumption (kWh) * : 75 kWh - Standby Power Consumption (W) **: 0.30 W - Display Resolution (Pixels) : 1920x1080 * Energy consumption kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days.
13 - Digital audio playback (ISO/IEC 13818-3) Specifications * Only for DVB-T2 13.
- 576p - 50 Hz - 720p - 50 Hz, 60 Hz - 1080i - 50 Hz, 60 Hz - 1080p - 24 Hz, 25 Hz, 30 Hz 4132 series TV Diagonal screen size - 32Pxx4132 : 80 cm / 32 inch - 43PFx4132 : 108 cm / 43 inch - 49PFx4132 : 123 cm / 49 inch Computer formats Resolutions (amongst others) - 640 x 480p - 60 Hz - 800 x 600p - 60 Hz - 1024 x 768p - 60 Hz - 1280 x 768p - 60 Hz - 1360 x 765p - 60 Hz - 1360 x 768p - 60 Hz - 1280 x 1024p - 60 Hz - 1920 x 1080p - 60 Hz Display resolution - PHx4132: 1366x768 - PFx4132: 1920x1080 4232 ser
Playback formats 4132 series TV (32 inch) - Image Codec : JPEG, GIF, PNG, BMP For PxS4132 - Audio Codec: MP3, WAV, WMA (v2 up to v9.2), AC3, AAC, HE-AAC, DTS 2.0 TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 - DIGITAL AUDIO OUT: SPDIF - AUDIO IN (DVI): Stereo 3.5mm mini-jack - SCART (RGB/CVBS): SCART adaptor - TV ANTENNA: 75 ohm coaxial (IEC) - Satellite - Video Codec: AVI, MKV, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, WMV9/VC1, HEVC - Subtitle: SRT, SMI, SSA, SUB, ASS, TXT 13.
- If the standby light on TV is on, the TV might not respond to the remote control. 14 Troubleshooting Creaking sound at startup or switch off When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 14.
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. Make sure that all cables are properly connected and that the correct network is selected.
behaviour is normal. 14.8 USB Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. - Make sure that the audio and picture file formats are supported by the TV.
15 care to avoid injury or damage. Safety and Care Risk of damage to the TV ! Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 15.1 Safety Important Risk of Injury to Children Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.
to adjust earlier supplies accordingly. Low Temperatures The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website www.philips.com/support are believed to be adequate for the intended use of the system. If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
standards applicable at the time of producing the products. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
16 16.4 Copyrights Other Trademarks 16.1 All other registered and unregistered trademarks are the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 16.2 Dolby Audio Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. 16.3 DTS 2.
Source: http://linuxappfinder.com/package/libsqlite 3-0 17 Open Source 17.1 libpng Open Source Software libpng is the official PNG reference library. It supports almost all PNG features. This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences. Source: www.libpng.
support for translucent windows and multiple display layers, not only on top of the Linux Framebuffer Device. libexpat Expat is an XML parser library written in C. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
Index Headphone Volume 37 Hearing Impaired 41 Help Menu 3 Home Menu 35 A Add Satellite 23 Advanced Picture Contrast Settings 36 Advanced Picture Settings 36 Antenna Connection 12 Audio Description 41 Audio Effects 41 Audio Language 40 Auto Clock Mode 40 Auto Volume Levelling 38 I Identify TV 3 Install Channel 21 Install Channel - Antenna 21 Install Channel - Cable 21 Install Channel - Satellite 23 B L Bass 37 Batteries 5 Language Settings 40 M C Menu Language 40 Mixed Volume 41 MPEG Artefact Reduct
Source List 20 Speakers or Headphones 41 Standby Mode 11 Subtitle Language 40 Super Resolution 37 Surround Sound 38 Switching On 11 T Teletext 28 Text 28 Text Language 40 Time 40 Time Settings 40 Time Zone 40 Troubleshooting 47 TV placement 8 U Universal Access 41 Update Satellite Channels 23 Update Software 4 Update Software - Local Updates 4 Update Software - OAD 4 USB Flash Drive 17 USB Hard Drive 18 USB Hard Drive, Format 39 User Manual 3 Utilities Menu 35 V VGA Connection 16 Video Contrast 36 Videos
Powered by TCPDF (www.tcpdf.