User manual
2
monitor damage will not be covered 
under warranty.
•  Do not knock or drop the monitor 
during operation or transportation.
•  Excessive usage of monitor can cause 
eye discomfort, it’s better to take 
shorter breaks more often at your 
workstation than longer breaks 
and less often; for example a 5-10 
minute break after 50-60-minute 
continuous screen use is likely to 
be better than a 15-minute break 
every two hours. Try to keep your 
eyes from eye strain while using the 
screen for a constant period of time 
by :
•  Looking at something varying 
distances after a long period 
focusing on the screen.
•  Conscious Blinking often while 
you work.
•  Gently closing and rolling your 
eyes to relax.
•  Reposition your screen to appro-
priate height and angle accord-
ing to your height.
•  Adjusting the brightness and 
contrast to appropriate level.
•  Adjusting the environment light-
ing similar to that of your screen 
brightness, avoid the uorescent 
lighting, and surfaces that don’t 
reect too much light.
•  Seeing a doctor if your symp-
toms.
Maintenance
•  To protect your monitor from 
possible damage, do not put 
excessive pressure on the LCD panel. 
When moving your monitor, grasp 
the frame to lift; do not lift the 
monitor by placing your hand or 
fingers on the LCD panel.
•  Oil-based cleaning solutions may 
damage the plastic parts and void 
the warranty.
•  Unplug the monitor if you are not 
going to use it for an extensive 
period of time.
•  Unplug the monitor if you need to 
clean it with a slightly damp cloth. 
The screen may be wiped with a 
dry cloth when the power is off. 
However, never use organic solvent, 
such as, alcohol, or ammonia-based 
liquids to clean your monitor.
•  To avoid the risk of shock or 
permanent damage to the set, do 
not expose the monitor to dust, 
rain, water, or excessive moisture 
environment.
•  If your monitor gets wet, wipe it 
with dry cloth as soon as possible. 
•  If foreign substance or water gets in 
your monitor, please turn the power 
off immediately and disconnect 
the power cord. Then, remove the 
foreign substance or water, and send 
it to the maintenance center.
•  Do not store or use the monitor in 
locations exposed to heat, direct 
sunlight or extreme cold.
•  In order to maintain the best 
performance of your monitor and 
use it for a longer lifetime, please 
use the monitor in a location 
that falls within the following 
temperature and humidity ranges.
•  Temperature: 0-40°C 32-104°F
•  Humidity: 20-80% RH
Important information for Burn-in/
Ghost image 
•  Always activate a moving screen 
saver program when you leave 
your monitor unattended. Always 
activate a periodic screen refresh 
application if your monitor will 
display unchanging static content. 










