User Guide

In the Program Installation sub-menu, program settings can be set. When this menu is open, all the
protections are inactive.
• Program No.: The program type can be selected with the cursor left/right buttons. These buttons
will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO".
If the program number of a certain type is 0, the corresponding type is not displayed. In order to
display a program number of the above-mentioned types, always enter two numbers, for example:
“01” for TV1 or digit “1” and up/down cursor.
• Input:
T
he "Input" menu item selects the desired input source that will be assigned to the program.
Possible values are TUNER, AV1, AV2, SIDE AV, SIDE S-VIDEO, RADIO, and DVI. Some
input sources may not be available on certain sets (see accompanying table).
Model / Input AV1 AV2 Side AV Side S-Video DVI
15HF5443 Scart1 - Video In S-Video In DVI
20/23HF5473 Scart1 - Video In S-Video In DVI
26HF5473 Scart1 Scart2 CVBS AV-In S-Video In DVI
32HF7473 Scart1 Scart2 CVBS AV-In S-Video In DVI
42HF7443 Scart1 Scart2 CVBS Video In S-Video In DVI
Note: When a SmartCard XPress Box is used, it is usually connected to Scart1.
- 7 -