Professional LCD TV User Manual

14 EN
 [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
 [Picture format]: Changes the picture
format.
 [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
 [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
 [Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Manually adjust picture settings
1 Press MENU.
2 Press to select [Setup] >
[Picture].
3 Press to select the following
settings.
 [Smart picture]
smart picture settings.
 [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
 [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
 [Brightness]: Adjusts the intensity and
details of dark areas.
 [Colour]: Adjusts colour saturation.
 [Hue]: Compensates for colour variations.
 [Sharpness]: Adjusts sharpness in the
image.
 [Noise reduction]: Filters and reduces
noise in an image.
 [Tint]: Adjusts the colour balance in an
image.
 [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
 [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This

 [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
 [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
 [MPEG artifact reduction]: Smoothes
out transitions on digital pictures. You
can switch this feature on or off.
 [Colour enhancement]: Makes colours
more vivid and improves the details
in bright colours. You can switch this
feature on or off.