operation manual

13
English
EN
Watch connected devices
Add new device
Note
• Before watching a connected device, you must
add it to the home menu.
• HDMI ARC compliant devices connected to
the HDMI ARC connector on the TV are
automatically added to the home menu.
1 Connect and switch on the device.
2 Press .
3 Select [Add your devices], then press
OK. Follow the on-screen instructions.
Watch connected device
1 Press .
2 Select the device from the home menu.
3 Press OK to conrm your choice.
• Press to return to the previously-
viewed channel.
• Enter a channel number using the
Numeric buttons.
To view analogue or digital channels
only
Filter the channel list to access analogue or
digital channels only.
1 In the channel list, press .
2 Select [Select list] > [Analogue] or
[Digital], then press OK. Depending on
your selection, only digital or analogue
channels become available.
Adjust TV volume
To increase or decrease volume
• Press +/- on the remote control.
• Press +/- on the side of the TV.
To mute or unmute sound
• Press to mute the sound.
• Press again to restore the sound.
Use the [Sound] menu to adjust headphone
volume. For more information, see Set up the
TV > Change picture and sound settings >
More sound settings (Page 22).