operation manual

16 EN
Use locks
Parental rating
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1 Press .
2 Select [Setup] > [Channel settings]
or [Satellite settings] > [Child lock] >
[Parental rating]. A message appears
prompting you to enter the child lock
code.
3 Enter the child lock code with the
Numeric buttons.
4 Select an age rating, then press OK. All
programmes beyond the selected age
rating are blocked.
Lock or unlock channels
1 In the child lock menu, select [Channel
lock].
2 Enter the child lock code with the
Numeric buttons. The [Channel lock]
menu appears.
3 Select channels to lock or unlock. Set or
change the child lock code
Set or change the child lock code
1 In the child lock menu, select [Set code]
or [Change code].
2 Enter the code with the Numeric
buttons.
Tip
• If you forget your code, enter ‘8888’ to override
any existing codes.
Use EPG
Overview
The Electronic Programme Guide (EPG) is an
on-screen guide available for digital channels.
EPG allows you to:
• View the information of current
programme being broadcast
• View the information of the next
upcoming programme
Note
• EPG is not available in some countries and also
dependent on the broadcast channel.
Switch on EPG
1 Press .
2 Select [Programme guide], then press
OK.
Use timers
Sleep timer
Sleeptimer switches the TV to standby after
a pre-dened period of time. You can always
switch off your TV earlier or reset the
sleeptimer during the countdown.
1 Press .
2 Select [Setup] > [TV settings] >
[Preferences] >[Sleep timer].
» The bar appears.
3 Press Navigation buttons to set the sleep
time. The Sleep timer can be up to 180
minutes in steps of ve minutes. If set to
zero minutes, the Sleep timer is switched
off.
4 Press OK to activate the Sleep timer. The
TV switches to standby after the pre-
dened period of time.