operation manual

27
English
EN
TV location
A range of TV settings are applied to suit the
location of the TV.
Shop or home mode
The exibility to change settings is limited if
the TV location is set to [Shop] mode. Set the
TV location to [Home] mode to access all TV
settings.
1 While watching TV, press .
2 Select [Setup] > [TV settings] >
[Preferences] > [Location] > [Home] or
[Shop], then press OK.
3 Restart the TV.
Stand mount or wall mount
Specic TV settings are applied to suit the
mounting location of the TV.
In the [Preferences] menu, select [TV placement]
> [On a TV stand] or [Wall mounted], then press
OK.
Display the TV clock
When watching TV, press .
» The TV clock is displayed at the
bottom right corner of the TV
screen.
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. [Country
dependent] applies UTC and gives you the
option of setting [Daylight saving].
1 While watching TV, press .
2 Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Auto clock
mode].
3 Select [Automatic], [Manual] or
[Country dependent], then press OK.
Enable or disable daylight saving
If clock mode is set to [Country dependent],
enable or disable daylight saving if required for
your time zone.
1 In the [Clock] menu, select [Daylight
saving] > [Daylight saving time] or
[Standard time], then press OK. Daylight
saving is enabled or disabled for your time
zone.
Set the clock manually
If clock mode is set to [Manual], set the date
and time manually.
1 In the [Clock] menu, select [Date] or
[Time], then press OK.
2 Use the Navigation buttons to make your
selection, then select [Done].