operation manual

32 EN
Setup settings
PBS Setup
[PBS Setup menu language]
Select menu language to be English, French,
German or Italian.
[PBS mode]
Enables / disables the Professional mode.
• [On]: All settings in the Professional mode
Setup menu are in effect.
• [Off]: The TV operates as a normal
(consumer) TV.
Only if set to Off mode it is possible to enter install
channels (using Channel setup) and make other TV
specic settings (i.e. brightness, .. etc).
[Room ID]
Entry eld to store 4 character to identify
Room ID.
[Switch on settings]
• [Switch on volume]: When the guest
switches the TV on, it will play at the
specied volume level.
• [Maximum volume]: This option species
the maximum allowable volume level of
the TV.
• [Switch on channel]: When the guest
switches the TV on, it will play at the
specied channel.
[Welcome message]
The Welcome message function allows the
TV to show a customized greeting to the
hotel guest whenever the TV is switched on.
This helps to personalize the hotel experience
for guests. The Welcome message can consist
of 2 lines of text, with each line containing a
maximum of 20 alphanumeric characters. Use
Navigation buttons on the remote control to
compose the Welcome message.
Note
• Welcome message is always disabled if you
select [BDS Mode Setting] > [OSD display]
> [Off].
• [Display message]: Select to show the
welcome message at power up cycle:
[On] to activate, [Off] to disable.
• [Welcome message line 1]: Set the
characters of the rst line message.
• [Welcome message line 2]: Set the
characters of the second line message.
• [Clear]: Clear the settings in Line 1 and
Line 2.
• [Message Time-out]: Set the period of
time to display the welcome message on
the screen when TV is turned on from
standby / Off.
[Control Settings]
• [Local keyboard lock]:
[Off]: The TV local buttons will
function normally.
[On]: The TV local buttons are locked,
except (Power).
• [Remote control lock]:
[Off]: All buttons on Guest remote
control will function normally.
[On]: All buttons on the Guest remote
control are disabled.
(It is still possible to enter the PBS Setup menu
by pressing [3, 1, 9, 7, 5, 3, (MUTE)]).