operation manual

34 EN
• [Enable Subtitles]:
Enables or disables the use of subtitles in
a DVB broadcast channel:
[Off]: No subtitles services available
(Prison Mode)
[On]: Subtitles services available
[Power settings]
• [Power on]: The power on function
allows the TV to enter a specic mode
([On] or [Standby]) of operation when
the mains power is activated (cold start):
[On]: The TV will always turn on (show
startup channel) after the mains power
is activated.
[Standby]: When set, the TV will always
turn to standby (status as dened in
Low power standby option) after the
mains power is activated.
• [Low power standby]:
The Low power standby option denes
the TV to enter a specic standby mode
after pressing the On/Off button on the
remote control. To wake-up the TV both
On/Off button on the RC or TV can be
pressed:
[Fast]: The TV will quickly turn on
(show startup channel. (This mode is
having more power consumption than the
Green mode).
[Green]: The TV will slower turn
on (show startup channel) then the
Fast. (This mode is having less power
consumption than the Fast mode).
• [Smart power]:
The power consumption for the Smart
power mode is dened by the Standard
Smart Picture setting in the TV Setup
part.
[Off]: The TV will start with Standard
Smart Picture setting, but the setting
can be changed in the guest setup
mode.
[On]: The TV will start with Standard
Smart Picture setting and Smart Picture
setup is not selectable in the guest
setup mode.
[Clock settings]
• [Display Standby]: Dene the brightness
level for the Clock LCD backlight if the TV
is in Standby mode:
[Set]: Off, 1, 2, 3, 4, 5
• [Display On]: Dene the brightness level
for the Clock LCD backlight if the TV is in
On mode:
[Set]: Off, 1, 2, 3, 4, 5
• [Time Setting]: This is only available if the
Time Download is set to Manual and can
be used to set the clock with the remote
control:
[Set]: Time entry eld [xx:xx Hr]
Time to be set by using arrow keys and numeric buttons
• [Time Download]: Select source for clock
time:
[Automatic]: During cold start the
Clock time is retrieved from the
Download Program channel before
displaying the tuned channel.
During a ‘going to Standby cycle’, the
clock time is updated as well.
[Manual]: The clock time is set using
the Time Setting option.
[Country dependent]: During cold
start the Clock time is retrieved from
the Download Program channel before
displaying the tuned channel, and
country dependent settings are made
(UTC+LTO). During a ‘going to Standby
cycle’, the clock time is updated as well.
• [Download Program]: Select the
programme where time downloading
must be performed.
• [Time Offset]: Offset time added to the
downloaded clock time:
[Slider]: -12 to 12 hr
• [Buzzer Volume]: Volume level of the
Clock Time Alarm level:
[Set]: Off, Low, High