User manual

36 EN
• [Program Info]:
[Action]: This function is to set the
necessary DVB parameters to locate
the proper VSecure RF channel to load
the VSecure RF Static or RF Dynamic
key(s):
[Frequency] Frequency of MUX (0362)
[Medium] Cable or Antenna
(DVB T/C)
[Service ID] # # # # # (00001)
[ONID] # # # # # (00000)
[NID] # # # # # (00000)
[TSID] # # # # # (00000)
[Symbol Rate] # . # # # (6.900)
[Modulation] QAM16, QAM32,
QAM64,
QAM128, QAM256
Above parameters must match head-end conguration.
• [Erase key option]:This function is to set
the stored VSecure Unprotect key(s) to
erase:
[Shared key]: Erase the Shared key
[Odd key]: Erase the Odd key
[Even key]: Erase the Even key
[All keys]: Erase the Shared, Odd and
Even keys
• [Erase key]: This function is to erase the
key that were selected by the Erase key
option:
[Action]: Press ► or OK to erase the
key(s).
[Speaker settings]
This function denes the simultaneously
working of the integrated speakers and the
headphone/bathroom speakers.
• [TV Speaker Enable]:
[Off]: The main speakers are muted.
The RC can control the volume and
mute of the headphone/bathroom
speaker.
[On]: The main speakers are active
and the behavior of the headphone/
bathroom speaker is dened by the
Independent Main Speaker Mute.
• [Independent Main Speaker Mute]:
[Off]: The RC volume and mute
will control the main speakers and
headphone bathroom speaker
simultaneously.
[On]: If the main speakers are muted by
the RC, the RC will control the volume
of the headphone/bathroom speaker.
• [Default Main Speaker Volume]:
This option denes the volume level
that will be set to the main speakers
when the TV is unmated and the
Independent Main Speaker Mute is set
to ‘On’.
[Factory default]
Restore the factory picture and sound setting.
Channel installation is not changed.