Operation Manual

6
2. Setting up the monitor
(3) Use screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
2
1
3
27xE1
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. (1) Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(2) Use screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
1
2
Connecting to your PC
271E1S
1
5
4
3
2
HDMI input
VGA input
HDMI audio out
AC/DC power input
Kensington anti-theft lock
275E1/275E1S
1
6
5
4
3
2
AC/DC power input
HDMI input
DisplayPort input
VGA input
Audio out
6
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to