E line 27xE1 241B8 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor................. 8 2.3 Remove the Base Assembly for VESA Mounting ............................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important screen for a constant period of time by : • If your monitor gets wet, wipe it with dry cloth as soon as possible. • Looking at something varying distances after a long period focusing on the screen. • • Conscious Blinking often while you work. • Gently closing and rolling your eyes to relax. If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.
1. Important that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor * Different according to region. 2. Setting up the monitor Note Use only the AC/DC adapter model: Philips ADPC1945EX 2.1 Installation Install base stand Package contents 27xE1SC 1. 27xE1SC E line 27xE1S 278E9 In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. Quick Start Register your product and get support at www.philips.
2. Setting up the monitor styrofoam. Notice this monitor is curved design, when you pull out the styrofoam, do not squeeze the panel to avoid broken panel. curved design, when you pull out the styrofoam, do not squeeze the panel to avoid broken panel. 2 1 2 1 Warning: This product is curve design, when attach / detach the base, place the protective material under the monitor and do not press down the monitor to avoid the damage. 27xE1C 1.
2. Setting up the monitor Connecting to your PC 272E1CA 271E1SC/271E1C 1 2 3 2 4 6 1 3 5 4 7 5 AC/DC power input DisplayPort input HDMI input VGA input Audio input 6 Earphone jack 7 Kensington anti-theft lock AC/DC power input HDMI input VGA input HDMI audio out Kensington anti-theft lock 271E1SCA/271E1CA Connect to PC 1. 1 2 4 3 5 Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 6 3.
2. Setting up the monitor 271E1SCA/271E1CA/272E1CA 2.2 Operating the monitor Front view product description 271E1SC/271E1C 3 7 6 3 7 6 5 4 2 5 4 2 1 Switch monitor’s power ON and OFF. 1 Access the OSD menu. Confirm the OSD adjustment. Switch monitor’s power ON and OFF. Adjust the OSD menu. Access the OSD menu. Confirm the OSD adjustment. Adjust the speaker volume. Change the signal input source. Adjust the OSD menu. Adjust the brightness level. Return to previous OSD level.
2. Setting up the monitor Description of the On Screen Display Note If this display has "DPS" for ECO design, the default setting is "ON" mode: it makes the screen looks slightly dim; for optimum brightness, enter to the OSD to set "DPS" to "OFF" mode. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 27xE1SC 1. 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. (1) Use screwdriver to loosen the screw located at the bottom of the base.
2. Setting up the monitor 27xE1C 1. 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. Use screwdriver to loosen the screw located at the bottom of the base,and remove the base from the stand. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 27xE1SC 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance.
3. Image Optimization 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? • FPS: For playing FPS (First Person Shooters) games.
4. Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 4. Adaptive Sync ■■ Processor A-Series Desktop and Mobility APUs Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight VA W-LED system Panel Size 27” W (68.6cm) Aspect Ratio Pixel Pitch Contrast Ratio (typ.) Optimum Resolution Viewing Angle Picture Enhancement Flicker free Display Colors Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode Adaptive Sync Connectivity 16:9 0.311 x 0.
5. Technical Specifications Power(271E1C/271E1SC) Consumption Normal Operation Sleep (Standby) Off Heat Dissipation* Normal Operation Sleep (Standby) Off Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 33.20 W (typ.) 33.30 W (typ.) 33.40 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.
5. Technical Specifications Heat Dissipation* Normal Operation Sleep (Standby) Off Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 132.08 BTU/hr 132.42 BTU/hr 132.76 BTU/hr (typ.) (typ.) (typ.) <1.71 BTU/hr <1.71 BTU/hr <1.71 BTU/hr (typ.) (typ.) (typ.) <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr (typ.) (typ.) (typ.
5. Technical Specifications Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances Cabinet Color Finish 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing White/Black Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@75Hz (HDMI input) 1920x1080@75Hz (DP input) (272E1CA) Recommended Resolution 1920x1080@60Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 63.89 1280x1024 60.02 79.98 1280x1024 75.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs Q5: What if I get lost when I am making monitor adjustments via OSD? labelled 'desktop area', move the sidebar to 1920x1080 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920x1080@60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC. Ans.
8. Troubleshooting & FAQs gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. (e.g. digital cameras, monitors, printers, scanners, etc) 3. User Define; the user can choose his/her preference color setting by adjusting red, green, blue color. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
2019 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
