Gaming monitor 272E1 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 2.3 Remove the Base Assembly for VESA Mounting ............................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important • Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : The screen may be wiped with a dry cloth when the power is off.
1. Important • known as “after-imaging” or “ghost imaging”, on your screen. 1.2 Notational Descriptions “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. Notes, Cautions and Warnings The following subsections describe notational conventions used in this document.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Note 272E1GSJ 2. Setting up the monitor Use only the AC/DC adapter model: Philips ADPC1945EX. 2.1 Installation 272E1GAJ Package contents Use only the AC/DC adapter model: Philips ADPC2065. 272E1GSJ Install base stand Gaming monitor 272E1 272E1GSJ Quick Start 1. Register your product and get support at www.philips.com/welcome Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen.
2. Setting up the monitor 272E1GAJ 1. Connecting to your PC Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 272E1GSJ 2 1 3 4 5 2. (1) Hold the base stand with both hands and firmly insert the base stand into the base column. (2) Use a screwdriver to tighten the screw located at the bottom of the base, and secure the base to the column tightly.
2. Setting up the monitor 2.2 Operating the monitor Front view product description 272E1GAJ 272E1GSJ 3 7 6 5 3 4 2 1 7 6 5 4 2 1 Switch monitor’s power ON and OFF. Switch monitor’s power ON and OFF. Access the OSD menu. Confirm the OSD adjustment. Access the OSD menu. Confirm the OSD adjustment. Adjust the OSD menu. Adjust the OSD menu. Adjust the brightness level. Adjust the speaker volume. Change the signal input source. Change the signal input source.
2. Setting up the monitor Description of the On Screen Display Main menu LowBlue Mode What is On-Screen Display (OSD)? Input 1, 2, 3,4 HDMI 1.4 DisplayPort Picture MPRT On, Off MPRT Level 0~20 Picture Format Wide Screen, 4:3 Brightness 0~100 Contrast 0~100 Sharpness 0~100 SmartResponse Off, Fast, Faster, Fastest SmartContrast On, Off On, Off Size (1, 2, 3, 4, 5, 6, 7) SmartFrame Brightness (0~100) Contrast (0~100) H. position V.
2. Setting up the monitor the monitor does not tilt downward by more than -5 degrees. Resolution notification This monitor is designed for optimal performance at its native resolution, 1920x1080. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920x1080 for best results. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel. 2.
2. Setting up the monitor 272E1GAJ 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 4. Use a screwdriver to remove the screws on the arm, and then detach the arm/stand from the monitor. 2. Use a screwdriver to loosen the screw located at the bottom of the base, and remove the base from the stand. 1 3 Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4.
2. Setting up the monitor 4. Use a screwdriver to remove the screws on the arm, and then detach the arm/stand from the monitor. * Display design may differ from those illustrated. Warning Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm Note Please purchase the appropriate wall mount; otherwise the distance between the back-plug-in signal cable and the wall would be too short.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 272E1GSJ 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance.
3. Image Optimization ebooks. By using a special algorithm which increases the contrast and boundary sharpness of text content, the display is optimized for a stress-free reading by adjusting the brightness, contrast and color temperature of the monitor. • 3.
4. AMD FreeSync Premium • • • • • 4. AMD FreeSync Premium AMD Radeon R9 290X AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight VA W-LED system Panel Size 27” W (68.6 cm) Aspect Ratio Pixel Pitch Contrast Ratio (typ.) Optimum Resolution Viewing Angle Picture Enhancement Flicker free Display Colors Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode EasyRead AMD FreeSync Premium Connectivity Signal Input Audio In/Out Input Signal Convenience Built-in speaker 16:9 0.311 x 0.
5.
5. Technical Specifications Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances Cabinet Color Finish 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications Note Please notice that your display works best at native resolution of 1920x1080. For best display quality, please follow this resolution recommendation. 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@144Hz Recommended Resolution 1920x1080@60Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 50.90 640 x 480 100.00 35.16 800 x 600 56.00 37.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs • 8. Troubleshooting & FAQs AUTO button doesn't function • 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks No Picture (Power LED not lit) Make sure the power cord is plugged into the power outlet and into the back of the monitor.
8. Troubleshooting & FAQs Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Green, red, blue, dark, and white dots appears on the screen • Image appears blurred, indistinct or too dark • • You can adjust “power on” light using the power LED Setup in OSD main Controls.
8. Troubleshooting & FAQs Q6: Is the LCD screen resistant to scratches? • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920×1080. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC. Q2: What is the recommended refresh rate for LCD monitor? Ans.
8. Troubleshooting & FAQs Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Note A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
2020 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
