Owner's Manual

49
Q8: Can I change the color setting of my
monitor?
Ans.:Yes,youcanchangeyourcolorsetting
through OSD control as the following
procedures,
• Press "OK" to show the OSD (On Screen
Display) menu
• Press"DownArrow"toselecttheoption
"Color" then press "OK" to enter color
setting, there are three settings as below.
1. Color Temperature; The six settings
are 5000K, 6500K, 7500K, 8200K, 9300K
and 11500K. With settings in the 5000K
    rangethepanelappears‘warm,'witha
red-white color tone, while a 11500K
    temperatureyields‘cool,blue-white
toning."
2. sRGB; this is a standard setting for
ensuring correct exchange of colors
between different device (e.g. digital
cameras, monitors, printers, scanners,
etc)
3. User Define; the user can choose
his/her preference color setting by
adjusting red, green blue color.
Note:
 Ameasurementofthecoloroflight
radiated by an object while it is being heated.
This measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue.
Neutral temperature is white, at 6504K.
Q9: Can I connect my LCD monitor to any PC,
workstation or Mac?
Ans.:Yes.AllPhilipsLCDmonitorsarefully
  compatiblewithstandardPCs,Macsand
  workstations.Youmayneedacableadapter
  toconnectthemonitortoyourMac
system. Please contact your Philips sales
representative for more information.
Q10: Are Philips LCD monitors
Plug-and- Play?
Ans.:Yes,themonitorsarePlug-and-Play
compatible with Windows 7/Vista/XP/NT,
  MacOSX,Linux
Q11: What is Image Sticking, or Image
Burn-in, or After Image, or Ghost Image in
LCD panels?
Ans.: Uninterrupted display of still or static images
over an extended period may cause
"burn in", also known as "after-imaging" or
"ghost imaging", on your screen. "Burn-in",
"after-imaging", or "ghost imaging" is a
well-known phenomenon in LCD panel
technology. In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of time
after the power has been switched off.
  Alwaysactivateamovingscreensaver
program when you leave your monitor
unattended.
  Alwaysactivateaperiodicscreenrefresh
application if your LCD monitor will display
unchanging static content.
Warning
Severe"burn-in" or "after-image" or
"ghost image" symptoms will not disappear
and cannot be repaired. The damage
mentioned above is not covered under your
warranty.
Q12: Why is my Display not showing sharp text,
and is displaying jagged characters?
Ans.:YourLCDmonitorworksbestatitsnative
  resolutionof1920x1080@60Hz.Forbest
display please use this resolution.
7. Troubleshooting & FAQs