27M1F5500P EN User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.
Table of Contents 1. Important ���������������������������������������� 1 1.1 Safety precautions and maintenance �����������������������������������1 1.2 Notational Descriptions ���������������3 1.3 Disposal of product and packing material ���������������������������������������������4 2. Setting up the monitor ��������������� 5 2.1 Installation ���������������������������������������5 2.2 Operating the monitor �����������������7 2.
1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
• • • To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • • Do not knock or drop the monitor during operation or transportation.
Ghost image • • Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2 Install the base 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation 1 Package contents Quick start 27M1F5500P 2. Hold the stand with both hands. (1) Gently attach the base to the stand. Register your product and get support at www.philips.com/welcome (2) Use your fingers to tighten the screw located at the bottom of the base.
3 Connecting to your PC Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 1 2 3 4 5 6 7 8 9 10 11 12 3. Connect the monitor signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your monitor into a nearby outlet. Fast Charger USB hub 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2.2 Operating the monitor 5 USB charging This display has USB ports capable of standard power output including some with USB Charging function (identifiable with power icon USB ). You can use these ports to charge your Smart phone or power your external HDD, for example. The display must be powered ON at all times to be able to use this function. 1 Description of the control buttons Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF.
2 Description of the On Screen Display Main menu Game Setting What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Swivel Note • This Philips monitor is certified with AMD FreeSync™ Premium Pro. The technology is used to match the refresh rate of the monitor to the graphic cards. Providing the smoothest gaming experience by reducing or eliminating judder, tearing, and stuttering.
2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 0° 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Then lift the monitor stand. 90° -5° * Display design may differ from those illustrated. • 2. While keeping the release button pressed, tilt the base and slide it out.
2.4 MultiView 3 How to enable MultiView by OSD menu? < 1 What is it? Multiview enables active variety connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. 1. Toggle to the right to enter OSD Menu Screen. 2. Toggle to the up or down to select main menu [PBP], then toggle to the right to confirm.
4 MultiView in OSD menu [PBP]: Picture by Picture Open up a sub-window side-by-side of another signal source. A (main) B When the sub source is not detected: A (main) B Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. If you expect to see full screen side by side, adjust your devices resolution as pop up attention resolution, you will able to see 2 devices source screen project to this display side by side without black strips.
3. Image Optimization 2. Toggle to the up or down to select between the smartImage modes. 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation. There are multiple selections: FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, EasyRead, SmartUniformity and Off. 3.
• • • • • Gamer 2: User’s preference settings saved as Gamer 2. LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity Studies have shown that just as ultraviolet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light.
3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
• • • • • 4. AMD FreeSync™ Premium Pro AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. 3. Select an HDR-capable display under Rearrange your displays. 4. Select Windows HD Color settings. STEP 5 5. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Below linkage is for the further more information from mircrosoft official website. Note https://support.microsoft.
6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio(typ.) Optimum Resolution Viewing Angle Monitor Colors Flicker Free Picture Enhancement Vertical Refresh Rate Horizontal Frequency SmartUniformity Delta E sRGB LowBlue Mode HDR EasyRead AMD FreeSyncTM Premium Pro Connectivity Connectors Sync input USB USB Ports Power Delivery USB SuperSpeed Convenience MultiView OSD Languages Nano IPS Technology W-LED 27" W (68.5 cm) 16:9 0.
Other Convenience Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot VESA mount (100 x 100 mm), Kensington Lock DDC/CI, sRGB, Windows 10/8.
Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 10% to 90% 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
6.1 Resolution & Preset Modes H. freq (kHz) Resolution V. freq (Hz) 222.056 2560x1440 143.912 2560 × 1440 @ 240 Hz (DP) 241.995 2560x1440 164.623 (DP) Recommended Resolution 294.000 2560x1440 200.000 (DP) 352.803 2560x1440 240.002 (DP) Maximum Resolution 2560 × 1440 @ 144 Hz (HDMI) 2560 x 1440 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.469 640x480 59.94 35 640x480 66.667 37.861 640x480 72.809 37.5 640x480 75 51.08 640x480 99.769 61.91 640x480 119.518 31.
7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video Active ON Yes Yes 37.4 W (typ.) White 52.3 W (max.
8. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
BRIGHT DOT DEFECTS 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 2 1 0 >15mm 2 BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 4 or fewer 2 or fewer 0 >15mm 4 or fewer TOTAL DOT DEFECTS Total bright or black dot defects of all types ACCEPTABL
8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center. For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
9. Troubleshooting & FAQs • AUTO button doesn't function • 9.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks • No Picture (Power LED not lit) • Make sure the power cord is plugged into the power outlet and into the back of the monitor.
Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • • Adjust the image using the “Auto” function in OSD Main Controls. Green, red, blue, dark, and white dots appears on the screen Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
9.2 General FAQs your user manual, monitor drivers (.inf and .icm files) will be installed automatically. Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Q4: How do I adjust the resolution? Ans.: Y our video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Ans.: R ecommended resolution for this monitor: 2560 x 1440.
• Ans.: Y es, the monitors are Plug-andPlay compatible with Windows 10/8.1/8/7, Mac OSX. Press button to select the option [Color] then press button to enter color setting, there are three settings as below. 1. Color Temperature: The settings are Native, 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears "warm, with a redwhite color tone", while a 11500K temperature yields "cool, bluewhite toning".
9.3 Multiview FAQs Q13: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your display pops out “Attention” to show the unlock/ lock status as shown below illustrators. Q1: How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source. If you want to change audio-source input , you can press to enter OSD menu. Select your preferred [Audio Source] option from the [Audio] main menu.
2022 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
