User manual

9
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
27M1N3200Z/27M1N3200ZA/
27M1N3200V/27M1N3200VA
27M1N3200VS/27M1N3200VL
2. While keeping the release button
pressed, tilt the stand and slide it
out.
27M1N3200VS/27M1N3200VL
27M1N3200Z/27M1N3200ZA/
27M1N3200V/27M1N3200VA
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
100mm
100mm
-5°
0° 90°
* Display design may dier from those
illustrated.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that the
monitor does not tilt downward by
more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.