27M1N5200P 27M1N5200PA EN User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.
Table of Contents 1. Important ������������������������������������� 1 1.1 Safety precautions and maintenance ����������������������������������1 1.2 Notational Descriptions ��������������3 1.3 Disposal of product and packing material ��������������������������������������������4 2. Setting up the monitor �������������� 5 2.1 Installation ��������������������������������������5 2.2 Operating the monitor ����������������7 2.
1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
• • bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • • Do not knock or drop the monitor during operation or transportation.
• 1.2 Notational Descriptions activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn-in”, also known as “afterimaging” or “ghost imaging”, on your screen. The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type.
1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2 Install the base 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation 1 Package contents Quick start 2. Hold the stand with both hands. (1) Gently attach the base to the stand. 27M1N5200P 27M1N5200PA Register your product and get support at www.philips.com/welcome (2) Use your fingers to tighten the screw located at the bottom of the base.
3 Connecting to your PC 1 2 3 4 Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 5 6 7 8 9 10 11 3. Connect the monitor signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your monitor into a nearby outlet. Fast Charger USB hub 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2.2 Operating the monitor 5 USB charging This display has USB ports capable of standard power output including some with USB Charging function (identifiable with power icon USB ). You can use these ports to charge your Smart phone or power your external HDD, for example. The display must be powered ON at all times to be able to use this function. 1 Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. Press to switch power on.
2 Description of the On Screen Display Main menu Game Setting What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
MPRT: To reduce motion blur, LED backlight will strobe synchronously with screen refresh, which may cause noticeable brightness change. 3 Resolution notification This monitor is designed for optimal performance at its native resolution, 1920 x 1080. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 x 1080 for best results. AMD FreeSync™ Premium / NVIDIA® G-SYNC® Compatible and MPRT cannot be enabled simultaneously.
2.3 Remove the Base Assembly for VESA Mounting Height adjustment Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Then lift the monitor stand. 130mm Pivot 2. While keeping the release button pressed, tilt the base and slide it out. 0° 0° -90° Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.
0° 90° -5° * Display design may differ from those illustrated. • • Warning To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
3. Image Optimization 2. Toggle to the up or down to select between the smartImage modes. 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation. There are multiple selections: FPS, Racing, RTS, Gamer 1, Gamer 2, LowBlue Mode, EasyRead, SmartUniformity and Off. 3.
• • • • • Gamer 2: User’s preference settings saved as Gamer 2. When this display receives HDR signal from the connected device, select a picture mode that best fits your needs. LowBlue Mode: LowBlue Mode for easy on-the-eyes productivity Studies have shown that just as ultraviolet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time.
3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
4. AMD FreeSyncTM Premium • • • • AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. NVIDIA® G-SYNC® Compatible When playing intense games with high refresh rates, screen tearing may appear without optimal graphics synchronization. Certified as NVIDIA® G-SYNC® Compatible, variable refresh rate (VRR) reducing screen tearing and syncing your monitor’s refresh rate with your graphic card’s output for a smoother gaming experience. Scenes appear instantly, objects look sharper, and gameplay is smooth, giving you a stunning visual experience and a serious competitive edge.
6. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 1920 x 1080 Turn the “HDR and WCG” to on mode. 4. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Note To switch off HDR function, please disable from Input device and its content. Inconsistent HDR settings between input device and monitor may cause unsatisfying images.
7. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio(typ.
Stand Tilt Swivel Height adjustment Pivot Power (27M1N5200P) Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply Power (27M1N5200PA) Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply -5 / +20 degree -45 / +45 degree 130 mm -90 / +90 degree AC Input Voltage AC Input Voltage AC Input Voltage at 100VA
Dimensions Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 614 x 549 x 212 mm 614 x 363 x 43 mm 780
7.1 Resolution & Preset Modes Note Please notice that your display works best at native resolution of 1920 x 1080. For best display quality, please follow this resolution recommendation. Maximum Resolution 1920 x 1080 @ 240 Hz Recommended Resolution For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. 1920 x 1080 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.469 640x480 59.
8. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
9. Customer care and warranty pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 9.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
9.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center. For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
10. Troubleshooting & FAQs AUTO button doesn't function • 10.1 Troubleshooting Note The Auto Function is not applicable in DVI-Digital mode as it is not necessary. This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks • Common Problems • No Picture (Power LED not lit) • • The auto function is applicable only in VGA-Analog mode.
• • Adjust the image using the “Auto” function in OSD Main Controls. recommended screen native resolution. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Green, red, blue, dark, and white dots appears on the screen • Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display.
• • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. monitor, make sure that there is no pressure or force applied to the panel surface side. This may affect your warranty conditions. Turn on your monitor and then turn on your PC. Q7: How should I clean the LCD surface? Q2: What is the recommended refresh rate for LCD monitor? Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol.
Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Note A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
2021 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.