User manual

11
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury�
1� Place the monitor face down on a
smooth surface� Pay attention not to
scratch or damage the screen� Then
lift the monitor stand�
2� While keeping the release button
pressed, tilt the base and slide it out�
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface�
VESA Mounting Screw M4� Always
contact manufacturer for wall-mount
installation�
100mm
100mm
-5°
0° 90°
* Display design may dier from those
illustrated�
Warning
• Toavoidpotentialscreendamage,
suchaspanelpeeling,ensurethat
themonitordoesnottiltdownward
bymorethan-5degrees.
• Donotpressthescreenwhile
adjustingtheangleofthemonitor.
Grasponlythebezel.