User manual

Connecting peripheral equipment
The television has 4 sets of external sockets situated at the back of the set (AV1 in, AV2 in,
YPbPr
and Monitor out).
The
AV1 in has Y, Pb, Pr and audio and video inputs.
The
AV2 in has S-Video, audio and video inputs.
The
Y, Pb, Pr has Y, Pb, Pr input (refer to details in “What’s Hot” section).
The
Monitor out socket has audio and video outputs.
& Connect the TV’s green, blue and red Y Pb Pr
(AV1 in) jacks to the corresponding
COMPONENT
VIDEO OUT jacks on the
pl
ayer.
é Connect the TV’s red and white (R and L)
AUDIO IN jacks to the corresponding
AUDIO OUT jacks on the player. Match the
cable colour to the jacks’ colou
r. The red jack
is the Right audio channel and the white jack
is
the Left audio channel.
“ Turn on the TV and DVD player. Set the TV to
CVI and
DVD background screen will come
on
the screen. You can now play your disc.
Note
: You need to select the channel CVI
manually to playba
ck DVD disc.
& Connect the TV’s yellow, white and red (AV2
in) jacks to the co
rresponding Video and
Audio jacks on the pl
ayer.
é Connect the TV’s red and white (R and L)
AUDIO IN jacks to the corresponding
AUDIO OUT jacks on the player. Match the
cable colour to the jacks’ colou
r. The red jack
is the Right audio channel and the white jack
is
the Left audio channel.
“ Turn on the TV and VCR player. Set the TV to
channel
AV2. You can now play your video
cassette
tape.
Connection
is also possible via the aerial cable.
You will therefore need to tune in your video
recorder’s test signal and assign a channel
number
0. Select channel 0 to playback.
DVD player
Video recorder
13