- Register your product and get support at www.philips.com/support 55PFL3907 EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center at 1 866 309 0843 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00 Enter below the model and serial numbers located on the back and right side of the TV cabinet. 
- Important 5 5 5 5 5 3 Your TV 6 6 6 Product information Screen care Environmental care Regulatory notices Side controls and indicators Remote control 4 Get started Supplied accessories Mounting stand onto TV Positioning the TV Installing the remote control batteries Connecting the antenna or cable Managing cables Connecting the AC power cord Switching on and initial setup 5 Use your TV Switching on your TV and putting it in standby mode Switching channels Adjusting volume Wat 
- Return your Product Registration Card or register online at www.philips.com/support today to get the very most from your purchase. Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips. 
- C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. 
- 1 Notice Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. P&F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. 
- PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. • • Clean the TV screen and frame with a soft cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV screen. Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. To avoid deformations and color fading, wipe off water drops as soon as possible. 
- 3 Your TV Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support Side controls and indicators a r b q c d e f p f g e h d o i c a b j a Ambient light sensor Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when [Active control] is set to [On with Light Sensor]. 
- q AUTO MODE Cycles through preset picture and sound settings. (See ‘Using auto mode’ on page 24.) b FAV Displays a list of all channels marked as favorite. (Includes subchannels) r OPTIONS Displays a list of menu items applicable to the highlighted object or screen. Fra nça is c SLEEP Sets a delay after which the TV switches to standby. Eng lis h a . (standby-On) Switches the TV on or puts it in standby mode. The TV is not powered off completely unless it is physically unplugged. 
- 4 Get started Positioning the TV Warning •• Do not insert the AC power cord into the power socket outlet before all the Supplied accessories • • • • • • • • connections are made. •• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. •• Before you move the TV, disconnect attached cables to prevent damage to connectors. Remote Control 2 x AAA, 1. 
- Connecting the antenna or cable If you connect a set-top box through RF IN / OUT Eng lis h If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specified by the service provider. Fra nça is cable antenna antenna RF cable OUT set-top box Es pa ñol IN IN OUT RF cable IN If you connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection. 
- Managing cables Route your antenna cable and all other cables through the cable management tie at the back of the TV. The holder helps keep your cables tidy and easily manageable. 1 Attach the cable management tie as illustrated below. Connecting the AC power cord Warning •• Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. 1 2 3 2 Locate the power connector at the back of the TV. 
- After you read a welcome screen, follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 20 minutes. Select your menu language with the Up/Down buttons on your remote control, press the OK button to proceed.    English Press Í /Æ to select [ Start], then press OK to begin [ Settings assistant]. Settings assistant will allow you to customize your picture settings to your personal preference. 
- 5 Use your TV Switching channels This section helps you perform basic TV operations. Switching on your TV and putting it in standby mode To switch on • Press . POWER at the side of the TV or press . (standby-On) on the remote control. To switch to standby • Press . POWER at the side of the TV or press . (standby-On) on the remote control again. Note •• Energy consumption contributes to air and water pollution. When the AC power cord is plugged in, your TV consumes energy. 
- Eng lis h Adjusting volume 2 Press SOURCE repeatedly to select the set-top box and wait a few seconds for the picture to appear. Fra nça is 1 Use the remote control of your set-top box to select channels. Es pa ñol Watching connected devices To watch connected devices 1 2 Switch on the connected device. »» The picture from your connected device might appear automatically on the TV screen. Use the remote control of the device to select channels. 
- 6 Use more of your TV Lock or unlock your device from the home menu Access TV menus 1 2 3 4 Menus help you to install channels, change picture and sound settings then access other features. Access the home menu The home menu gives you easy access to connected devices, picture and sound settings as well as other useful features. This section describes how to lock or unlock specified device. 5 Press MENU on the remote control. Use Î /ï/Í /Æ to select a device to lock or unlock. 
- Install Philips Wireless MediaConnect 1 2 3 4 5 Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Software] > [MediaConnect code]. • Write down the 12-digit code displayed on the screen. You will need this to download MediaConnect software. Start your internet browser on your PC and open the Philips Wireless MediaConnect download page at www.wifimediaconnect.philips.com/ On the website, you can check the necessary PC system requirements. 
- Guide to DLNA Listen to music using DLNA 2 Server 1 Audio Server 2 Photos Server 3 Video 1 1 2 3 4 Folder Highway Blues Video10 Blue hills Title: ... Album: ... Duration: 00:03:41 Year: 5 Press Î /ï to select a file or a folder. Press OK or Æ∆ to play the selected files. • Press OK or Æ∆ to pause, press OK or Æ∆ again to resume. • Press ∫ to skip up the next file. • Press ¢ to skip down the previous file. • Press Ê to stop playback. 
- Enjoying vTuner Net TV offers Internet services for your TV. Use the TV remote control to browse the Net TV Internet pages. You can play movies, listen to music and much more, all from your TV screen. -- Because Net TV is an online system, it can be modified over time to better serve its purpose. -- Some Net TV services can be added, changed or stopped after some time. -- You cannot download and save files or install plug-ins. 
- 5 [New Stations] List of new stations [Most Popular Stations] List of popular station [Get access code] Displays the access code, which will be required when creating a vTuner account on your PC [Reset] Removes all stations / folders in [Recently Played], [Favorites] and [My Added Stations] Press MENU to exit. Note •• Video service may not be fully available with narrowband internet connection. (e.g. 56k modem) When watching video, use broadband internet connection. 
- 3 4 Follow steps 1 to 3 in ‘Internet radio playback’ on page 18. Use Î /ï to select the station you want to add to [Favorites], then press Color buttons (yellow). • The selected station is added to [Favorites] folder. • Confirmation message will appear. • If you select a folder, use Î /ï to select the desired station in the next hierarchy, then press Color buttons (yellow). Press OK. Press MENU to exit. Note •• You can also add your favorite stations to [Favorites] on your PC. 
- Using Twitter Guide to the Player Screen On the player screen, you can set various options to the currently playing song. 1 2 3 4 You can view your Twitter feeds and more using the Twitter application on this unit. -- For more details about Twitter, please visit www.twitter.com American Oldies Radio Logging in to Twitter ABC XXXXX XXXXX 4:52 0:00 After you set up the network connection, you must log in with your Twitter account. Make sure the unit is not in network service or Browse USB mode. 
- Displaying Mentions on Twitter Twitter Home Screen Your TV displays replies for the logged in user. 2 Home Mentions List 1 Menu 2 Viewing channel 3 Timeline 4 Operation guide If you have no replies, [ TV was not able to acquire the Tweet.] will appear. Viewing Lists on Twitter The list shows timeline categories such as friends, family, colleagues, or sports teams created by yourself on your account. Favorite Trends • Phily and Maggy Right as rain. That was a sense of humor... 
- Changing picture and sound settings You must set [Home] in [ Location]. (Refer to page 30.) Otherwise, personalized picture and sound settings will not be memorized after the unit goes to standby mode. Setting items Color enhancement Active control Changing picture settings Description Off Sets Color enhancement to off. On Makes colors more vivid bright colors. Off Sets Active control to off. 
- Changing picture format Eng lis h [Automatic] [Super zoom] [4:3] [Wide screen] [Movie expand 16:9] [Movie expand 14:9] Fra nça is 2 Press FORMAT on the remote control. Use Î /ï to select a picture format and press OK to confirm your choice. Summary of picture formats Display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. 
- Using your TV as a PC monitor Setting items Description Use a VGA connector to connect a PC to your TV. For sound, add an audio cable with a stereo mini jack. Off SRS TruSurround HD On Sets SRS TruSurround HD™ to off. Off Caution •• Before you connect your PC, set the PC monitor refresh rate to 60Hz. 
- Create or edit a list of favorite channels Setting the time manually 1 1 6 Press OPTIONS to enter edit mode. »» A list of channels is shown. Use Î /ï to highlight a channel. Press OK to select or deselect the highlighted channel. »» The channel is added to or removed from the list of favorite channels. Press MENU to exit. Switch to one of the channels on a list 1 2 3 Press OK on the remote control to display the last list that you selected. Use Î /ï to highlight a channel. 
- Difficulties viewing closed captions on DTV programming If you have difficulties viewing closed captions on DTV programming, including HDTV, received from your subscription television provider, you should : • • • consult any consumer information and manuals / guides on closed captions for DTV programming provided by your subscription television provider; ensure that the captioning function on your set-top box, if applicable, is turned on; and, ensure that the captioning function on your DTV is turned on. 
- 1 2 3 4 5 Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Features] > [Child lock]. Enter your PIN. (See ‘Setting your PIN’ on page 26.) Use Î /ï to select [Channel Lock], then press OK. Caption settings Lock after Sleeptimer None TV ratings lock TV-Y Movie ratings lock TV-Y7 Canada English rati... TV-G Canada French ratin... 
- Using the movie ratings lock Summary of Canada English ratings lock You can control viewing of movies based on their MPAA (Motion Picture Association of America) rating. Rating Description All E C All items in the ratings list are locked. Exempt program. Programming suitable for children under the age of 8 years. No profanity or sexual content of any level allowed. Minimal comedic violence. Suitable for children ages 8 and over. Low intensity violence and fantasy horror allowed. 
- EasyLink Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected via an HDMI connector. This function allows you to operate the linked functions between our brand devices with EasyLink capabilities and this unit connected via a HDMI cable. Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Installation] > [Preferences] > [EasyLink]. 
- Set your location to home You can set the location of your TV to [Home] or [Retail store]. Choosing [Home] gives you full flexibility to change predefined settings for picture and sound. 1 2 3 Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Installation] > [Preferences] > [Location]. Select [Home] and then press OK to confirm your choice. Press MENU to exit. Note •• You must set [Home]. 
- WPS code Select this setting if your router has Wi-Fi Protected Setup (WPS) but does not have a WPS button. Enter the 8-digit WPS PIN code shown on your TV in the router settings menu via PC before [Connect] is selected. Manual If your wireless network with authentication setting (WEP, WPA-PSK or WPA2-PSK), WEP / WPA Key entry screen will appear. Enter the WEP / WPA key of the selected wireless network using Î /ï/Í /Æ, then press OK. [Clear]: Clear the entered number or word. 
- Proxy configuration Netflix ESN 1 Displays the ESN information. Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Installation] > [Network] > [Manual network settings] > [Proxy configuration]. 2 Use Î /ï to select a setting and then press OK. • For default settings, select [Do Not Use]. • If you need to change the proxy setting as instructed by your internet service provider to set the designated proxy address and port, select [Use]. 
- •• This unit accepts USB flash memory only. Other storage devices such as external HDD by USB bus power will not work. •• Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device. Your TV is fitted with a USB connection that enables you to view photos or listen to music stored on a USB storage device. 
- Listen to music on a USB storage device 1 2 In the USB content browser, use Î /ï to select [Music]. Press Î /ï to select a file or a folder on the USB storage device. Watch your Video on a USB storage device 1 2 Track1.mp3 Picture In the USB content browser, use Î /ï to select [Video]. Press Î /ï to select a file or a folder on the USB storage device. Video1.avi Picture Video2.mpg Track2.mp3 Music Music Video 3 Press OK or Æ∆ to play the selected files. 
- 7 Install channels Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Installation] > [Language]. Picture Sound Language English Channels Français Preferences Español Fra nça is Use Í /Æ to select channel input box, then use Î /ï to select a channel you want to memorize. Use Í /Æ to select [Search], then press OK. Display will be changed to [Store] from [Search] when the channel is found, then press OK. Press MENU to exit. 
- 8 Update your TV software Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available. New software can be downloaded from our website at www.philips.com/support using the model number of your TV (e.g. 55PFL3907) to find information. Updating software USB update You can update the software by using USB storage device. 1 2 If the TV is on, press . POWER at the side of the TV. 
- Network update 4 5 6 Press MENU on the remote control and then use Î /ï/Í /Æ to select [Setup] > [Software] > [Software update] > [Network]. Use Í /Æ to select [Yes], then press OK. • This unit will then start checking for the latest firmware version. Fra nça is 3 Follow steps 1 to 2 in ‘Connection test’ on page 30. Confirmation message will appear. Use Í /Æ to select [Yes], then press OK. • The unit will start downloading the latest firmware version. 
- 9 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide. Connection overview * a i ** j b c k d l e f g h a Ethernet port For internet connection using an Ethernet cable with a RJ-45 connector. i USB terminal Data input from USB storage devices only. Do not connect any device to this terminal such as; digital camera, keyboard, mouse, etc. 
- HDMI - Highest quality This section describes how to connect a selection of devices with different connectors. Different types of connectors can be used to connect a device to your TV. The following sections describe examples only, other configurations are possible. Connecting a set-top box, Blu-ray Disc player and HD game console via HDMI OUT Es pa ñol HDMI set-top box Supports high-definition signals and gives highest picture and sound quality. Video and audio signals are combined in one cable. 
- Connecting a digital home theater amplifer using HDMI ARC Connecting a set-top box, DVD recorder via composite connectors and analog audio audio L/R + video OUT IN HDMI 1 IN only IN DVD recorder HDMI ARC digital home theater amplifier RF IN OUT HDMI cable RF OUT Note •• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to an HDMI Home Theater System. 
- LAN 2 3 WAN 4 5 Fra nça is 1 Connecting a digital home theater amplifier using a digital audio coaxial cable Eng lis h Connecting the TV to the internet using an Ethernet cable hub or broadband router Ethernet cable OUT DIGITAL AUDIO LAN telecommunications equipment (modem, etc.) Es pa ñol internet IN Ethernet cable digital home theater amplifier Note •• Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment. 
- Connecting a PC Add devices If you connect a PC with a VGA connector at the back. After connecting devices, assign the device attached to each connector. This allows you to easily identify devices connected to your TV. 1 AUDIO IN IN 2 3 4 AUDIO OUT VGA OUT PC Press MENU on the remote control and then use Î /ï/Í /Æ to select [Add new devices]. Use Í /Æ to select [Start], then press OK. Use Î /ï to select a device and press OK. 
- No power or indicator light. The TV is not connected to the power. Press . POWER at the side of the TV or on the remote control. Ensure that the AC power cord is connected tightly to the TV power connector and to the power socket outlet. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. Connect the TV to a different power socket outlet. No picture or sound is HDCP authentication fail. detected from the device Ensure that your HDMI cable is certified. 
- 11 Specifications Note •• Specifications are subject to change without prior notice. 
- Eng lis h 12 Warranty WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof. 
- 13 Index A Antenna, connect Audio Audio setting Auto mode Auto TV on Auto volume leveling N Netflix Network 9 24 24 24 29 24 P Pandora PC Philips Wireless MediaConnect Picture format Picture settings R C Cables component composite connection quality HDMI manage cables YPbPr Channels install lock Child lock channel lock PIN ratings lock Clock Closed caption Cloud TV Connections Controls Customer support service D Device List Device lock E EasyLink Environmental care Equalizer F FAV Film Fresh 
- License This section describes software license used for this product. This product uses some open source software: GPL software: l inux, gcc, binutils, busybox, dhcpcd LGPL software: directfb, glibc, Qt, LiTE BSD: WPA Supplicant MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2, c-ares Free Type, LibJPEG, Open SSL, JSON_Parser, gSOAP, libcurl, Open GL GPL The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 
- PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. 
- In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. 
- You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker. 
- gSOAP gSOAP Public License Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
- 10. LIMITATION OF LIABILITY. 
- P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248 P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura, Huixquilucan Edo. de México C.P. 52787 Philips and Philips Shield are used under license of Koninklijke Philips Electronics N.V.