Owner manual

12
Switchingchannels
Press CHANNEL+/− on the side of the TV.
• Press CH+/− or enter a number on the remote control.
For digital channels, press a number (1 to 999) followed by a dot
“•” and then the corresponding sub channel number (1 to 999).
e.g. 108.30.
• Press PREV.CH to return to the previously viewed channel.
5 UseyourTV
This section helps you perform basic TV operations.
SwitchingonyourTVandputtingitin
standbymode
Toswitchon
• Press
.
POWER at the side of the TV or press
.
(standby-On)
on the remote control.
Toswitchtostandby
• Press
.
POWER at the side of the TV or press
.
(standby-On)
on the remote control again.
Note
•
Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
EN