Owner manual

14
Lockorunlockyourdevicefromthehomemenu
This section describes how to lock or unlock specied device.
1 Press MENU on the remote control.
2 Use
Î
/
ï
/
Í
/
Æ
to select a device to lock or unlock.
3 Press OPTIONS on the remote control.
4 Use
Î
/
ï
to select [Devicelock] or [Deviceunlock], then press OK.
• If device lock is unlocked, [Devicelock] will be displayed.
If device lock is locked, [Deviceunlock] will be displayed.
• When device lock is locked,
will be displayed at the top
right of the device icons.
5 Enter your PIN. (See ‘Setting your PIN’ on page 26.)
• Once you have set PIN, PIN input menu does not appear after
the unit is turned on.
EnableordisableRCkeyforwardingfromthehomemenu
This section describes how to enable or disable RC key forwarding for a
particular device.
1 Press MENU on the remote control.
2 Use
Î
/
ï
/
Í
/
Æ
to select a device to enable or disable
RC key forwarding.
3 Press OPTIONS on the remote control.
4 Use
Î
/
ï
to select [EnableRCkeyforwarding] or [DisableRC
keyforwarding], then press OK.
• If RC key forwarding is set to off, [EnableRCkeyforwarding]
will be displayed. If RC key forwarding is set to on, [Disable
RCkeyforwarding] will be displayed.
• When you set RC key forwarding on,
will be displayed at
the top left of the device icons.
Note
•
This function is available only when your devices are connected to this unit
through HDMI cables and assigned to an HDMI port (HDMI1 to HDMI4) with
[Addnewdevices] in the home menu.
6 UsemoreofyourTV
AccessTVmenus
Menus help you to install channels, change picture and sound settings
then access other features.
Accessthehomemenu
The home menu gives you easy access to connected devices, picture
and sound settings as well as other useful features.
1 Press MENU on the remote control.
Watch TV
Browse USB Browse PC
Net TV
Add new devices
Setup
2 Use
Î
/
ï
/
Í
/
Æ
to select and navigate through one of the following
menus.
• [WatchTV] Switches back to the antenna source if another
source is selected.
• [BrowseUSB] Accesses USB menus.
• [BrowsePC] Accesses DLNA menus.
• [NetTV]Accesses Net TV menus.
• [Addnewdevices] Adds new devices to the home menu.
• [Setup] Accesses menus that allow you to change picture,
sound and other TV settings.
3 Press OK to conrm your choice.
4 Press MENUto exit.
Tip
•
After selecting [Addnewdevices], follow the on-screen instructions to select the
correct device and connector.
EN