Momentum 326M6 www.philips.
Table of Contents 1. Important ��������������������������������������� 1 1.1 Safety precautions and maintenance ���������������������������������� 1 1.2 Notational Descriptions ������������� 3 1.3 Disposal of product and packing material ������������������������������������������� 4 2. Setting up the monitor ��������������� 5 2.1 2.2 2.3 2.
1. Important proper cooling of the monitor’s electronics. 1. Important • Do not block the ventilation holes on the cabinet. • When positioning the monitor, make sure the power plug and outlet are easily accessible. • If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. • 1.1 Safety precautions and maintenance Please use approved power cord provided by Philips all the time.
1. Important monitor damage will not be covered under warranty. • • Do not knock or drop the monitor during operation or transportation. Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours.
1. Important • Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. 1.2 Notational Descriptions “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “Burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. Package contents Momentum 326M6 Quick Start Register your product and get support at www.philips.com/welcome Monitor User’s Manual 使用产品前请阅读使用说明 2. Hold the stand with both hands. Gently attach the stand to the VESA mount area until the latch locks the stand. Contents: User’s Manual Drivers .
2. Setting up the monitor Connecting to your computer 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: Press more than 3 seconds to switch display power OFF.
2. Setting up the monitor The OSD Menu Main menu Ambiglow Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. LowBlue Mode Input Sub menu Off Ambiglow Bright, Brighter, Brightest Auto Mode Bright, Brighter, Brightest User Define White, Red,Rose,Magenta,Violet, Blue,Azure,Cyan,Aquamarine,Green, Chartreuse,Yellow,Orange On 1, 2, 3,4 Off 1 HDMI 2.0 2 HDMI 2.0 3 HDMI 2.
2. Setting up the monitor Resolution notification 2.3 MultiView This monitor is designed for optimal performance at its native resolution, 3840 × 2160 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 × 2160 @ 60 Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2. Toggle to the up or down to select main menu [PIP / PBP], then toggle to the right to confirm. Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. 3. Toggle to the up or down to select [PIP / PBP Mode], then toggle to the right. • PIP / PBP Input: There are four different video input to choose as the sub display source: [1 HDMI 2.0], [2 HDMI 2.0], [3 HDMI 2.0] and [DisplayPort].
2. Setting up the monitor Swap A and B source in [PBP] mode: A (main) • B ↔ B (main) A Off: Stop MultiView function. A (main) Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4 x 8mm. Always contact manufacturer for wallmount installation. 2.4 Remove the Base Assembly for VESA Mounting Before you start disassembling the Display base, please follow the instructions below to avoid any possible damage or injury. 1.
3. Image Optimization 1. 3. Image Optimization Toggle to the left to launch the SmartImage on screen display. 2. Toggle to the up or down to select among FPS, Racing, RTS, Gamer1, Gamer2, LowBlue Mode, SmartUniformity and Off. 3.1 SmartImage What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also toggle to the left to make confirmation. There are multiple modes to select: FPS, Racing, RTS, Gamer1, Gamer2, LowBlue Mode, SmartUniformity and Off.
3. Image Optimization Studies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • • 3.
4. Ambiglow off mode depending on your preference which helps reduce eye fatigue under prolonged usage. 4. Ambiglow How to enable Ambiglow Ambiglow function can be selected through OSD menu by pressing right button to choose and pressing right button again to confirm the selection: 1. Press right button. 2. Select [Ambiglow]. 3. To switch Ambiglow off, or choose Ambiglow, select [Auto Mode] or [User Define].
5. Adaptive Sync • • • • • • • 5. Adaptive Sync Adaptive Sync PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
6. HDR 6. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desk top, enter to Display settings. STEP 5 2. Select the display/monitor. 3. Adjust resolution to 3840 x 2160 4. Turn the “HDR and WCG” to on mode. 5. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Below linkage is for the further more information from mircrosoft official website. https://support.microsoft.
7. Technical Specifications 7. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.
7.
7. Technical Specifications Cabinet Color Finish Black Glossy Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
7. Technical Specifications • 7.1 Resolution & Preset Modes Maximum Resolution 3840x2160@60Hz (DP 1.4/HDMI 2.0+HDR) Recommended Resolution 3840x2160@60Hz (DP 1.4/HDMI 2.0+HDR) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 60.02 1024 x 768 75.03 44.77 1280x 720 59.86 63.89 1280 x 1024 60.02 79.
8. Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color 72.03 W (typ.
9. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 9. Customer care and warranty 9.
9. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
9.
9. Customer care and warranty 9.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
10. Troubleshooting & FAQs • 10. Troubleshooting & FAQs Visible signs of smoke or sparks 10.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Make sure the signal cable is properly connected to your computer. • Make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.
10. Troubleshooting & FAQs may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 3840 x 2160 pixels. Image appears distorted. Text is fuzzy or blurred. • Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution.
10. Troubleshooting & FAQs Q5: What if I get lost when I am making monitor adjustments via OSD? 11500K temperature yields "cool, bluewhite toning". 2. sRGB: This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc). Ans.: Simply press the button, then select [Reset] to recall all the original factory settings. Q6: Is the monitor screen resistant to scratches? 3.
10. Troubleshooting & FAQs "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in monitor panel technology. In most cases, the "Burn-in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.
2019 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
