User manual

11
2. Setting up the monitor
the front bezel.
2. The MultiView selection menu
appears. Press ▲ or ▼ button to
select.
PBP
Swap
Off
PIP
Multi View
P
3. Press button to confirm
your selection and then exit
automatically.
How to enable MultiView by OSD
menu?
Besides pressing the hotkey
directly on the front bezel, the Multi-
View function can also be selected in
OSD menu.
1. Press button on the front bezel
to enter OSD Menu Screen.
PIP/PBP
Audio
Picture
Input
Color
PIP/PBP Mode
PIP/PBP Input
PIP Size
Swap
PIP Position
Off
PIP
PBP
• Press ▲ or ▼ button to select main
menu [PIP / PBP], then press
button.
• Press ▲ or ▼ button to select [PIP /
PBP Mode], then press button.
• Press ▲ or ▼ button to select [PIP]
or [PBP].
• Now you can move backward to set
the [PIP / PBP Input], [PIP Size], [PIP
Position]., or [Swap].
2. Press button to confirm your
selection.
MultiView in OSD menu
• PIP / PBP Mode: There are two
modes for MultiView: [PIP] and
[PBP].
[PIP]: Picture in Picture
Open up a sub-window
of another signal source.
B
A (main)
When the sub source is
not detected:
B
A (main)
[PBP]: Picture by Picture